StickerFab

Ford Licensed Bronco Cursive Script Metal Emblem Kit (Modified) - 2021+ Bronco

  • Sale
  • Regular price $76.45
  • 2x Ford official licensed fender emblems ( modified by StickerFab, pins removed)
  • 3M adhesive promoter
  • Templates
  • StickerFab application fluid
  • Larger, bolder, and metal vs 6th Gen Heritage badges



Ford Licensed Bronco Cursive Metal Emblems (Modified)

These Ford licensed products are made to the original Bronco specs.  We have modified them to fit the 2021+ Bronco without drilling.  This makes installation a breeze and your vehicle equipped with the highest quality products emblems available.

These were designed for the original Bronco which uses locator pins on the fender.  As most owners do not want to drill holes in their newer Bronco, we have carefully removed these pins so you don't have to.

Dimensions:  Approximately 10.5 inches wide and 2.25 inches tall.  They outsize the 6th Gen Heritage badges by 1.5 inches!

NOTE:  Originally designed for 1966 Broncos.  We have modified a licensed product from it's original form to make it EASIER to install on a flat surface.  In its original, licensed form, it is not intended to mount on a 6th generation Bronco without modification (either pin removal, or drilling of your fender).

Includes

  • 2x Ford official licensed fender emblems ( modified by StickerFab, pins removed)
  • 3M adhesive promoter
  • Templates (Driver / Passenger)
  • StickerFab application fluid

Comparison

INSTALLATION (Please Read)

NOTE:  The adhesive is VERY sticky so make sure to test fit and double check your placement before removing the adhesive backing.  Make sure the emblem is not bowed out.  Also make sure the emblem is straight.  While removing pins and transit the emblems can lose their alignment, but are easily to mold back to original position.  View your template.  The letters are not all the same size, but the proper alignment is described in the template.

Most vehicles have a rake to them.  Find an alignment you are pleased with.  Then you must base your installation off of your own reference.  Mock up your install before installing.  No warranty is available for your alignment issues so please triple check before finalizing install.

FAQ

 

This usually happens on the passenger side. If the emblem matches the mounting surface when test fit, it will adhere properly with no separation. Do not use force during test fitting to make it fit. If you notice any gap when test fitting, STOP and bend the emblem gently to match the surfaces. Then re-test.

 Updated Method (10/27/2023)

75-85 degree weather recommended.

 NOTE: Any adhesive promoter residue can be removed using rubbing alcohol.


OLD METHOD (for purchases before 10/27/2023)

EASY INSTALL

Type 1 Install Using Alignment Strips (easiest and flattest mounting spot) - The perfect installation environment is relatively low humidity and 75-85 degree WEATHER.  This allows the adhesive bond to become strong by 24 hours and highest by 72 hours.

Visually inspect emblem prior to installation and mock up your installation before removing 3M backing.  

Some other items you might want to have on you:

NOTE:  We do not recommend using the promotor on stealth PPF surfaces or vinyl wraps.

Please watch out installation video.  Remember that when working with adhesive promoter, you will want to finish the installation shortly after applying and then clean off the remaining promoter. 

PROFESSIONAL INSTALL

Type 2 Install Using Driver / Passenger Template (*WARNING* slightly curved) - See photo of Iconic Silver Bronco above.  This is the placement location.  You will cut along the dotted line of the supplied template and then follow the alignment instructions on the template.  Tape the template to each side after the area is prepped in the same manner as the Type 1 install.

The only difference will be the location.  Installation method remains the same.

*IMPORTANT* Visually inspect emblem prior to installation and mock up your installation before removing 3M backing.   Make sure the emblem matches the mounting surface curve without placing pressure on the emblem.  If they do not match you MUST bend the emblem to match the mounting surface.

NOTE:  If you place it in an area that has a curve on the fender then you will want to gently shape the emblem to match that curve.  Please see FAQ above for important details.



Customer Reviews

Based on 62 reviews
94%
(58)
2%
(1)
0%
(0)
2%
(1)
3%
(2)
T
Tim Schultz (Lutz, FL, US)
Looks awesome!

I purchased this one and a cheaper one on Amazon. I compared them both and this metal one was way better. The Amazon one was plastic and the font just looked a little off. Yes this one was a little more but you own a Bronco, not a Corolla!

M
M. Thomas (Austin, TX, US)
Great Product

I added to my ‘23 Bronco to replace the factory stickers. These are made from metal and much more sturdy than some of the plastic versions out there.
Great price for a great product

J
JENNY HERRING (Bainbridge, GA, US)

Ford Licensed Bronco Cursive Script Metal Emblem Kit (Modified) - 2021+ Bronco

R
Ron Green (Buckley, WA, US)
Bronco Fender Scripts

I am very pleased with the original look and feel and the fact that I don't have to drill holes in my recent restoration. Hoping they stay fixed to the fender with the bonding tape. Thanks StickerFab.

D
David Cate (Ellijay, GA, US)
Ford Bronco Fender Emblems

Very nice metal emblems. Arrived promptly and was easy to install.

D
Dareik (New York, NY, US)
Must Have for Any Bronco Owner

High quality, great instructions, and tremendous customer service.

P
Patrick N (Roanoke, TX, US)
Terrible Experience

I purchased and installed these on my Bronco, following StickerFab’s installation instructions. A few weeks after installation, the metal passenger side emblem separated from the foam backing and fell in the garage. The vehicle was sitting still, in the garage and the emblem separated completely clean from the backing installed by StickerFab. I reached out to customer service feeling this should be a warranty issue and submitted photos and requested a replacement with backing and template. I offered to return the defective unit as well so they could resell. Here’s where it got fun. I was shocked when I was offered a slight discount in lieu of a replacement. They said that they were still loosing money at that discount. When I argued that it was their product that failed and I shouldn’t be charged anything for a replacement, they told me that it was an installation issue and because I hadn’t had a professional install it. The website now shows a warning about having a professional install a sticker. The backing remained on my bronco until today. After an hour of goo be gone and peeling I finally got the backing off the car. Their adhesive completely failed without leaving a speck on the metal emblem, mine took an hour and goo be gone to get off and it was an installation issue. What a joke of a company. Buyer beware. The emblem, made by Ford, looks awesome on my garage wall. Somehow StickerFab has messed up the sticker portion of the product.

Hello,

Unfortunately all the emblems are the same and it comes down to the installation. We note that the passenger side is the side that needs the most attention when verifying that it lays against the fender during test fitting with no added force.

If you add force and the emblem is bent the adhesive will push up against the fender and slowly pull away from the emblem over time. The adhesive is not strong enough to bend the metal emblem to contour the fender.

We do not make these emblems or the adhesive that is attached to them. They all are assembled and licensed by the same company.

Our offer still stands.

C
Craig McBreen (Kansas City, MO, US)
Cursive Script Metal Emblem

Looks fantastic. With black trim on my Sas Badlands in the Area 51 color. Bad ass