{"product_id":"oracle-flush-style-lensless-led-tail-lights-2021-ford-bronco","title":"Oracle Flush Style LED Tail Lights - 2021+ Bronco","description":"\u003c!-- split --\u003e\n\u003cul\u003e\n\u003cli\u003eFlush mount design - protrudes significantly less than factory, protecting lights on tight trails\u003c\/li\u003e\n\u003cli\u003e60W high-powered LED reverse lights provide over 8,000 lumens of rear illumination\u003c\/li\u003e\n\u003cli\u003eSignature perimeter lighting wraps the vehicle body - visible from any rear angle\u003c\/li\u003e\n\u003cli\u003eAvailable for both factory halogen and factory LED Broncos (different part numbers)\u003c\/li\u003e\n\u003cli\u003ePlug-and-play for halogen-equipped Broncos - FORScan programming required for LED-equipped\u003c\/li\u003e\n\u003cli\u003eCompatible with 21 Offroad Magic Reverse Harness and flush mount tail light overlays\u003c\/li\u003e\n\u003cli\u003eFits 2021+ Ford Bronco (all trims except Raptor and Bronco Sport) - Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c!-- split --\u003e\u003c!-- splitnew --\u003e\n\u003ch2 style=\"text-align: center;\"\u003eORACLE Flush Style LED Tail Lights - 2021+ Ford Bronco\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eORACLE Lighting\u003c\/strong\u003e \u003cstrong\u003eflush-style\u003c\/strong\u003e LED Tail Lights transform the rear of the \u003cstrong\u003e2021+ Ford Bronco\u003c\/strong\u003e with a low-profile design that sits tight to the body panel - protruding significantly less than the factory tail lights. That difference matters on tight trails where protruding factory tails get caught on rocks and brush. The flush wrap-around design also means the signature \u003cstrong\u003eperimeter lighting\u003c\/strong\u003e is visible from any rear angle.\u003c\/p\u003e\n\u003cp\u003eAt the rear, \u003cstrong\u003e60W high-powered LED reverse\u003c\/strong\u003e lights provide over \u003cstrong\u003e8,000 lumens\u003c\/strong\u003e of illumination - essentially a pair of LED light bars built into each tail light. This is a major upgrade over the factory reverse light output.\u003c\/p\u003e\n\u003cp\u003eAvailable in four configurations depending on your Bronco's factory tail light setup. Broncos with factory halogen tail lights get a \u003cstrong\u003eplug-and-play\u003c\/strong\u003e install. Broncos with factory LED tail lights need the -023 series and require a quick FORScan programming step to configure the BdyCM module - instructions included.\u003c\/p\u003e\n\u003cdiv style=\"position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; margin: 0.5em 0 1em;\"\u003e\u003ciframe src=\"https:\/\/www.youtube.com\/embed\/wpIB2HBECjw\" title=\"ORACLE Flush Style LED Tail Lights - 2021+ Ford Bronco Installation\" style=\"position: absolute; top: 0; left: 0; width: 100%; height: 100%;\"\u003e\u003c\/iframe\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1766\/0599\/files\/Bronco_Tails_W-watermark_053c3dfd-b94e-4928-97b3-d3aab1a9a2d6.gif\" alt=\"ORACLE Flush Style LED Tail Lights on 2021+ Ford Bronco\" style=\"max-width: 100%; height: auto; display: block; margin: 1em auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eWhich Version Do I Need?\u003c\/h3\u003e\n\u003cp\u003eThese lights are available in two part number series depending on whether your Bronco came from the factory with halogen or LED tail lights:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e5892-504 \/ 5892-504-T\u003c\/strong\u003e - For Broncos with factory HALOGEN tail lights. Plug-and-play install, no programming required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5892-023 \/ 5892-023-T\u003c\/strong\u003e - For Broncos with factory LED tail lights. Requires a FORScan BdyCM module configuration step after install.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eHow to tell which you have: Check the window sticker or the door jamb sticker for \"LED Tail Lamps.\" You can also look at the lights themselves - factory LED tail lights have a more complex multi-element light pattern compared to the simple single-bulb halogen units. If you are unsure, the halogen version (5892-504 series) is the more common fitment across most Bronco trim levels.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1766\/0599\/files\/Top-View-2_1024x1024.gif\" alt=\"ORACLE Flush Mount vs Factory Tail Light Top View Comparison\" style=\"max-width: 100%; height: auto; display: block; margin: 1em auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003e60W LED Reverse Lights\u003c\/h3\u003e\n\u003cp\u003eEach tail light unit houses a \u003cstrong\u003e60W high-powered LED reverse\u003c\/strong\u003e light array that produces over \u003cstrong\u003e8,000 lumens\u003c\/strong\u003e of rear-facing illumination. That is essentially a pair of LED light bars integrated directly into the tail light housing. Whether you are backing into a campsite at night or navigating a dark trail, the reverse light output is a massive step up from the factory incandescent or LED reverse bulbs.\u003c\/p\u003e\n\u003ch3\u003eSignature Perimeter Lighting\u003c\/h3\u003e\n\u003cp\u003eThe ORACLE \u003cstrong\u003eflush mount\u003c\/strong\u003e design features a signature \u003cstrong\u003eperimeter LED\u003c\/strong\u003e light strip that wraps around the outer edge of the tail light housing - following the contour of the vehicle body. Because the housing sits flush and wraps around the body panel, this \u003cstrong\u003eperimeter lighting\u003c\/strong\u003e is visible from any rear angle, not just directly behind the vehicle. It gives the Bronco a distinctive, unmistakable look day or night.\u003c\/p\u003e\n\u003ch3\u003eTrail Protection\u003c\/h3\u003e\n\u003cp\u003eFactory Bronco tail lights protrude noticeably from the body. On tight trails - squeezing past trees, boulders, or brush - those protruding tails take the hits. The ORACLE \u003cstrong\u003eflush mount\u003c\/strong\u003e design sits dramatically closer to the body panel, reducing the exposure and protecting the lights from trail damage. Less protrusion means less to snag, less to crack, and less to replace.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1766\/0599\/files\/OEM_Vs_Flush_Mount.jpg\" alt=\"OEM vs ORACLE Flush Mount Tail Light Profile Comparison\" style=\"max-width: 100%; height: auto; display: block; margin: 1em auto;\"\u003e \u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/1766\/0599\/files\/Picture1.png\" alt=\"ORACLE Flush Style LED Tail Light Detail\" style=\"max-width: 100%; height: auto; display: block; margin: 1em auto;\"\u003e\u003c\/p\u003e\n\u003ch3\u003eFORScan Programming (LED Broncos Only)\u003c\/h3\u003e\n\u003cp\u003eIf your Bronco came with factory LED tail lights, you will need to complete a one-time FORScan programming step after installation. This is done through the BdyCM Module Configuration (NOT the AsBuilt Module). The settings required are:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRear LED Turn Outage: Disabled\u003c\/li\u003e\n\u003cli\u003eRight Rear Stop and Position Lamp Usage: Stop and Turn\u003c\/li\u003e\n\u003cli\u003eRight Rear Turn Lamp Usage: Not Used\u003c\/li\u003e\n\u003cli\u003eLeft Rear Stop and Position Lamp Usage: Stop and Turn\u003c\/li\u003e\n\u003cli\u003eLeft Rear Turn Lamp Usage: Not Used\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFORScan is free software available at forscan.org. An OBD2 adapter is required. This is a straightforward process and full instructions are included with the lights.\u003c\/p\u003e\n\u003ch3\u003eCompatible Accessories\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-au\/products\/flush-mount-tail-light-overlays-2021-bronco-w-oracle-tails\"\u003eFlush Mount Tail Light Overlays\u003c\/a\u003e - Dark smoke and other finishes available, designed specifically for the ORACLE flush mount housings.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-au\/products\/21-offroad-magic-reverse-harness-for-auxiliary-switches-reverse-on-demand-2021-bronco\"\u003e21 Offroad Magic Reverse Harness\u003c\/a\u003e - Taps into the Bronco's reverse signal via the auxiliary switch bank. Fully compatible with the ORACLE flush mount lights.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-au\/products\/oracle-flush-style-led-tail-light-dual-function-reverse-turn-signal-modules-2021-bronco\"\u003eAmber\/White Dual-Function Turn Signal Modules\u003c\/a\u003e - Adds sequential amber turn or white reverse function to the perimeter lighting strip.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eHow do I know if my Bronco has halogen or LED tail lights?\u003c\/strong\u003e\u003cbr\u003eCheck the order sticker in the door jamb for \"LED Tail Lamps\" or look at the tail lights directly - LED units have a more complex multi-element light pattern. If you are unsure, the halogen version (5892-504 series) is the more common fitment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes the LED version (5892-023) require FORScan?\u003c\/strong\u003e\u003cbr\u003eYes - factory LED Broncos need a BdyCM module configuration change after installation. The exact settings are listed in the FORScan section above. Instructions are also included with the lights.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWill these fit my Bronco Raptor?\u003c\/strong\u003e\u003cbr\u003eNo - these do not fit the Bronco Raptor or Bronco Sport. They fit all other \u003cstrong\u003e2021+ Ford Bronco\u003c\/strong\u003e trims.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre overlays available for these lights?\u003c\/strong\u003e\u003cbr\u003eYes - \u003ca href=\"\/en-au\/products\/flush-mount-tail-light-overlays-2021-bronco-w-oracle-tails\"\u003e\u003cstrong\u003eflush mount\u003c\/strong\u003e overlays\u003c\/a\u003e in dark smoke and other finishes are available separately and are designed specifically for these housings.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre these compatible with the 21 Offroad Magic Reverse Harness?\u003c\/strong\u003e\u003cbr\u003eYes - fully compatible. The \u003ca href=\"\/en-au\/products\/21-offroad-magic-reverse-harness-for-auxiliary-switches-reverse-on-demand-2021-bronco\"\u003eMagic Reverse Harness\u003c\/a\u003e works seamlessly with the ORACLE \u003cstrong\u003eflush mount\u003c\/strong\u003e lights.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2021-2025 Ford Bronco with factory halogen tail lights - use 5892-504 series (plug-and-play)\u003c\/li\u003e\n\u003cli\u003e2021-2025 Ford Bronco with factory LED tail lights - use 5892-023 series (requires FORScan)\u003c\/li\u003e\n\u003cli\u003eDoes NOT fit: Bronco Raptor, Bronco Sport\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ORACLE Lighting","offers":[{"title":"Red Lens \/ For Factory Halogen Equipped Vehicles","offer_id":45300421984575,"sku":"orl5892-504","price":839.0,"currency_code":"AUD","in_stock":true},{"title":"Red Lens \/ For Factory LED Equipped Vehicles","offer_id":45300422017343,"sku":"orl5892-023","price":755.0,"currency_code":"AUD","in_stock":true},{"title":"Tinted Lens \/ For Factory Halogen Equipped Vehicles","offer_id":53095113883967,"sku":"ORL5892-504-T","price":877.0,"currency_code":"AUD","in_stock":true},{"title":"Tinted Lens \/ For Factory LED Equipped Vehicles","offer_id":53095113916735,"sku":"orl5892-023-T","price":877.0,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0176\/5743\/0070\/files\/oracle-flush-style-led-tail-lights-2021-bronco-stickerfab-1.jpg?v=1758050761","url":"https:\/\/www.stickerfab.com\/en-au\/products\/oracle-flush-style-lensless-led-tail-lights-2021-ford-bronco","provider":"StickerFab","version":"1.0","type":"link"}