CORNCOB Glow in the Dark Large Overlay Letters (fits Oracle Lights and what they replace)
Here's an easy way to add some Iowa heritage to your vehicle or anywhere you want. They also happen to fit some of the most popular light up letters on the automotive market (Oracle!). They may fit other letters that look similar or can be used in a standalone format. Put them on your grille, bumper, side of your vehicle, etc.
They measure approximately 1.2" high.
By request, we have added photoluminescent letters. While neat, this material is very expensive. Unlike our other letter overlays, you will only receive one set by default. Also, think about the glow in the dark stickers from your childhood that you put on your walls and on your ceiling. These are not made of radioactive tritium and will not just glow on their own.
They are designed from going to a very bright location to a dark one. Examples are driving around during the day and then going into a parking garage or your home garage. You can also charge them up with a bright light, cut the light, and see them at night.
For UV and minor impact protection, we will add a 2.5mil overlaminate on top.
Style Photoluminescent > Design - Solid - This is simple photoluminescent paper which appears white when not charged or it is very bright outside. After a proper charge, go in the dark and it will glow in the typical glow in the dark color (see photos).
Style Outlined in Photoluminescent + Design - This is printed on photoluminescent paper with an outline left unprinted. While the whole thing will glow to a degree, the border is what stands out in the typical glow in the dark color.
StickerFab was founded in 2014 in Des Moines, IA as a business that could provide custom cut vinyl decals for the automotive market. We have evolved, moved to Florida and now have the ability to do much more than just cutting vinyl. We have full print capabilities and have expanded to providing many parts for our customers.
The printing allows us to come close to matching existing palettes of colors found on many vehicles. We will laminate these to extend the life and protect against harmful UV light.
Sold as a single set (due to material costs). Additional letters of the alphabet are available on request and may be substituted.
NOTE: ORACLE lights sold separately. Does not have transfer paper. Letters can be rearranged (IE CORN, NCO, BRO, COO, BOO).
Clean the application area to prepare it for installation. Choose a relatively low humidity day and 70-80 degree weather if possible. Any variance from this will affect the installation.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
- Detailing Spray
- Soapy Water / StickerFab Application Fluid
- Heat Gun or Hair Dryer
Wet installs require one drop of dish or hand soap in a cup of water. Apply to the vinyl so that the first attempt doesn't make the vinyl permanently stick to the surface. Then you can slide it around and push out the extra water once it is in place with your fingers.
Try doing the install in the shade so it doesn't heat up the vinyl rapidly. Keep a hair dryer around if you want to apply light heat to dry it out once properly aligned. Otherwise you can park it back in the sun and push down the corners. Please make sure all the letters are dry before driving the vehicle or using the object it has been applied to.
Adding small amount of heat to the vinyl after positioned can help it dry out faster and to wrap the edges if they are overlapping the side of the Oracle letters.
These made a huge difference to the overall look of our Bronco. Being a base model with black lettering from the factory, these hot pepper red stickers actually matched the body color perfectly. The glow in the dark effect is also a cool plus. Just fyi, there is a thin white outline, at least on the glow in the dark option. I think it still looks great, but just a heads up if you did want solid lettering.
I’ve been looking for ways to spice up my exterior and these are perfect! I love the way they look on my area 51 bronco. Thanks Stickerfab!
These are thick and super easy to put on straight. They really do glow in the dark and look AMAZING. I CANT STOP LOOKING AT IT.
These aren’t exactly a match for Area 51 up close but at a distance it’s pretty good. Nice upgrade until I can do the LED letters.
After a day sitting in the sun these have a very bright outline on a gloss black letter. Definitely an eyecatcher. luminescence doesn't last a long time, but it looks good when not active too. If damaged, would purchase again.
So far I am absolutely pleased with the quality and craftsmanship that stickerfab puts out! Looking forward to seeing what else they can bring to the 2021+ Broncos. Even threw in an extra for the dash in case of mistakes. I’d like to see some photo-luminescent products for the interior also if possible.
All the vinyl that I ordered came as expected and even though I would have preferred extras for each order, I was able to make it work.
I really liked it would definitely recommend