STI Wing End Overlays
Thank you for viewing this product from our Veteran owned shop. This wing end overlay really adds style to your vehicle. It's a unique piece that installs on the center of the wing ends. Leaves a nice painted border around the end cap as well.
NOTE: Please be sure to let us know what text you want inside the center. You can choose STI, 2015+ WRX, or classic WRX (italic). For the 2022 WRX, you must have an OE style 15-21 STI spoiler. Also for the 2022, if your wing is angled down and not straight, you may not want to choose a logo as it will be at an angle also.
This material is durable and will last for years. We source the vinyl for these products from US suppliers. They are often made in the US or Europe. Material standards are high. For the 3D Carbon material, do not apply wax. Just clean with normal soap and water. Only the 3D Carbon material is textured.
Matte and gloss colors are not difficult to install if you use StickerFab Application Fluid.
INSTALLATION
Recommended Items:
- Quick detailer without wax (for cleaning the application area)
- Microfiber
- StickerFab Application Fluid or Soapy Water (1 drop dish soap per cup of water)
- Squeegee
- Hair dryer or heat gun (optional, use low heat to dry fluid)
Clean the surface of the wing ends. If you use StickerFab application fluid or soapy water, the adhesive will be a little more forgiving if you need to lift / put the vinyl back down. Just use a squeegee or your fingers to push the water and air out once you align it properly.
If you choose a logo, there will be application film to keep the letters aligned correctly. The DIY install will leave you proud of the work you've done. A great conversation piece as others will probably want to know how you did it all.