SprayOnyx Rear Camera Sprayer for the 2021+ Ford Bronco
Ford plumbed a washer to the front camera and left the rear one exposed. This fixes that.
Check your Bronco before you order. Fits the 2021+ Ford Bronco and Bronco Raptor with a hardtop, or a soft top that is hardtop-ready. Not compatible with Bronco Sport. Early 2021 soft tops were built without the rear washer plumbing, so look in the back of your Bronco for the washer fitting and connector. Not sure what you have? Send us a message before you order.
Covered in Mud. Then Not.
Mud, road salt, snow and dust all land on the rear camera, and the stock setup does nothing about it. SprayOnyx slides onto the camera and puts a focused jet directly on the lens, so one press of the rear washer clears your view.
It draws from the same washer reservoir your Bronco already carries, so there is no extra tank to fill and no new switch to learn. Real footage, one press, no second take.
|
 |
See It Clear a Muddy Camera
 |
Sits Tight at the Hub
The sprayer slides onto the rear camera behind the spare and clicks onto a short washer line, so it stays put on the trail and on the highway. Nothing is cut and the factory camera is not modified.
Go with black or gray to blend into the wheel, Galaxy for a color-shifting finish, or a brighter color to stand out.
|
Finishes & Colors
Row one, left to right: Galaxy, black, gray, white. Row two: red, orange, yellow, green. Row three: blue, baby blue, purple, and Galaxy installed. The Galaxy finish shifts between blue and purple. Finish options are listed above the Add to Cart button.
 |
Color-Matched Bronco Keychain Included
Every kit ships with a Bronco grille keychain color-matched to the sprayer you choose, plus a printed installation guide for your kit.
|
Choose Your Kit
Hardtop - a Y fitting tees into the factory washer line.
Soft top - a single inline connector. Your soft top must be hardtop-ready.
Dual Top - both connectors plus two quick disconnects, so you can swap between tops and keep it working.
What's in the Box
Kit components: the sprayer (shown in Galaxy), valve and fittings, and tubing.
Kit Contents
- 1 rear camera sprayer in your chosen finish
- 2 ball check valves
- 1 barb fitting
- 1 length of tubing
- 1 quick disconnect
- Bronco grille keychain, color-matched to your sprayer
- Printed installation guide for your kit
Installation: Three Connections
No cutting, no splicing, no drilling. Most people have it on in under 30 minutes. A printed guide for your kit ships in the box.
1. Plug Into the Washer Line
Remove the spare tire (a second person helps) and pop off the rear trim panels. Disconnect the factory rear washer connector at the circled spot and fit your connector in line, so the factory feed keeps working.
|
 |
 |
2. Route the Tubing
Run the tube down the left side, across the bottom and up the factory wiring channel along the back of the door, then pass it through the marked hole. Hold the tube in its final position and measure before you cut. Join the two lines with the ball valves, which arrive set the right way round.
|
3. Slide It On and Click In
Slide the sprayer onto the camera and click the quick connect on. Run the rear washer with the panels still off and check every joint for leaks, then reassemble in reverse order and put the spare back on.
|
 |
You will need: trim panel removal tools and a lug wrench or the factory tire iron for the three lug nuts.
Complete the Build
This Part Fits
| Years |
2021 and newer |
| Make |
Ford |
| Models |
Bronco, Bronco Raptor (hardtop or hardtop-ready soft top). Not Bronco Sport. |
| Location & Includes |
Rear camera on the spare tire mount - sprayer, 2 ball check valves, barb fitting, tubing, quick disconnect, keychain and printed guide |
Shipping & Returns: Backed by our 30-day return policy and a 3-year warranty on the kit. Installation is at the owner's discretion and risk. Not sponsored by or affiliated with Ford.
FAQ
|
Will this fit a Bronco Sport?
No. It is made for the full-size 2021+ Bronco and Bronco Raptor. A Bronco Sport version is not available.
I have a soft top. Does it work?
It can, as long as your Bronco is hardtop-ready. Early 2021 soft tops were built without that plumbing. Check for the washer fitting and connector in the back of your Bronco, or message us before ordering.
Does it need its own fluid tank?
No. It ties into the washer system already on your Bronco and uses the same reservoir.
|
Will installing it affect my warranty?
It should not. Nothing is cut, spliced or drilled, and it uses the washer connections your Bronco already has, so it can be removed and the vehicle returned to stock. Installation is still at the owner's discretion and risk.
How do I pick between Hardtop, Soft top and Dual Top?
Match the kit to the top you run. Choose Dual Top if you swap between a hardtop and a soft top, since it includes both connectors.
Is this a new, untested product?
No. It has been on the market for several years and is used by Bronco owners on and off road.
|
