3-in-1 chase, brake and reverse light — built around the Diode Dynamics SS10 chase bar: a yellow chase light, red brake light and white reverse light in one compact bar.
Purpose-built for the 2025+ 4Runner — a TEQ Customs housing and bracket set made for the 6th-gen 4Runner, with your rear wiper and sprayer still working and the window still rolling down.
Tough ASA-CF housing — carbon-fiber-filled ASA plastic that resists UV and heat, so it keeps its finish in the sun.
20 chase patterns, 3 brake modes — programmable strobe patterns and SafetyStrobe brake modes, changed with the included magnet tool.
Choose your mount — pick a version with a Wolfbox rear-camera mount or without one, and full kit or housing only.
No-splice wiring — factory connector for the brake light, plus two Posi-Taps for the reverse and chase functions.
Lifetime warranty — on the TEQ housing kit, plus the SS10 bar's Diode Dynamics limited lifetime warranty.
Chase Bar + 3rd Brake Light Kit — 2025+ Toyota 4Runner
Chase, brake and reverse lighting in one clean rear-window mount, made for the 6th-gen 4Runner.
The Rear Lighting Upgrade Your 4Runner Was Missing
This kit gives the 2025+ 6th-gen 4Runner a simple, sturdy and seamless way to mount a chase bar. The housing and brackets are made by TEQ Customs specifically for this truck, so the bar sits where it should instead of on a universal bracket that never quite lines up.
It keeps your factory rear window wiper and sprayer working, and the window still rolls down like normal.
Brake Light You Can't Miss
The SS10's red SafetyStrobe brake light has three programmable modes, so whoever is behind you notices the moment you step on the pedal. It plugs into the brake circuit through a factory-style connector in the included harness.
Reverse Light and Chase Light, Too
Besides the brake light, the same bar adds a high-power white reverse light and a yellow chase light with 20 selectable strobing patterns. Reverse is tapped from your tail light with a non-splice Posi-Tap, so there is no cutting into factory wiring.
Pick Your Version
The kit comes in two mount versions and two kit options, so you only pay for what you need.
Mount version: No Camera Mount, or Wolfbox Camera Mount for a rear camera built into the housing.
Full Kit: TEQ housing and brackets, Diode Dynamics SS10 chase bar, wiring harness, magnet tool and 2 Posi-Taps.
Housing Only: the TEQ housing and brackets without the light bar. It is built around the Diode Dynamics SS10, so confirm your bar fits before you order.
The Wolfbox camera itself is not included with either mount version.
About the Diode Dynamics SS10 Chase Bar
3-in-1 design: yellow chase, red brake and white reverse light.
20 selectable strobing patterns for the chase light.
SafetyStrobe brake light with 3 programmable modes.
High-power reverse light with optional vehicle signal activation.
IP69K-rated for extreme conditions.
Limited lifetime warranty. Made in USA with global materials.
⚙️ Installation — About 2 Hours, Moderate
Wiring is required. The harness has a factory connector for the brake light. The reverse input taps into the tail light with a non-splice Posi-Tap, and a second Posi-Tap connects the chase light to your parking lights, which come on with the first turn of the headlight knob.
If the chase light is wired to the parking lights, the reverse light will not come on while the chase function is active. The brake function works either way.
Prefer a switch? You can run the chase light to a dash switch or switch system instead. The harness gets the input into the cab, but not all the way to the front of the vehicle.
Note: Made for the 2025+ 6th-gen Toyota 4Runner. The Wolfbox camera is not included. Check your local regulations on flashing and auxiliary lighting before using the chase function on public roads.
FAQ
Will this fit my 4Runner? It is made for the 2025+ 6th-gen Toyota 4Runner.
What is the difference between Full Kit and Housing Only? The Full Kit includes the TEQ housing and brackets, the Diode Dynamics SS10 chase bar, wiring harness, magnet tool and 2 Posi-Taps. Housing Only is the housing and brackets without the light bar.
Is the Wolfbox camera included? No. The Wolfbox Camera Mount version has a mount for the camera, but the camera is not included.
Do I lose my rear wiper or window? No. The kit keeps your rear window wiper and sprayer working, and the window can still be rolled down.
How hard is the install? Plan on about 2 hours at a moderate difficulty. Wiring is required, but the reverse and chase connections use non-splice Posi-Taps.
How do I turn the chase light on? Wire it to your parking lights, or run it to a dash switch or switch system. With the parking-light option, the reverse light will not turn on while chase is active, but the brake light always works.
