EZ Install Door Cup Protectors
A common place for light scratches is directly behind the door handles. We knew this spot was a good location for some vinyl and have been getting some requests for it. Here is our solution. An easy install product with relief cuts that can also accent the area.
NOTE: Fits BOTH two door and four door models. Two door customers will have extra side door overlays.
We're starting off offering 4 different types of materials. All of these materials are sourced in the US and are a premium choice for your vehicle.
Matte black is one of the easiest colors to install in general. It stretches and responds to heat very well.
The gloss black we chose has air egress channels and that is why it is a little more expensive than standard colors. Air egress channels assist in providing a path for air to escape during installation (less bubbles). Some cost is also due to the fact that it is cast versus calendared.
General Formulations 3D carbon wrap also has air egress channels and a textured, dark appearance. We've used it for tons of accents. To clean, use 303 Aerospace Protectant. It'll look great! Don't use any type of wax. This is the thickest material and offers the highest durability.
Clear Oracal ORAGUARD 270G stone protection offers a transparent solution to paint protection. It is 6 mil in thickness.
All options have high outdoor durability ratings.
NOTE: Each sale includes 6 overlays for the front door and 2 overlays for the rear door. This allows you to have a couple backups in case you have any kind of installation issue.
Clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
- Detailing Spray
- Soapy Water
- Heat Gun or Hair Dryer
- Supplied Felt Tip Squeegee
Wet installs require one drop of dish or hand soap in a cup of water. Apply to the vinyl so that the first attempt doesn't make the vinyl permanently stick to the surface. Then you can slide it around and push out the extra water once it is in place with your squeegee.
Try doing the install in the shade so it doesn't heat up the vinyl rapidly.
Watch our video for more details. We purposely did a long installation and did not skip any parts. You may fast forward and rewind at your own leisure.
if you have ever installed paint protective film before, you know door handle cups can be a pain if they are too thick or the adhesive is weak. these are just right unless you have the habit of dragging keys on your vehicle or have razors for finger nails.
Perfect protection for an afterthought area of your Bronco!! My wife’s bronco is only 3 months old and already a few little scratches there. Ordered the matte black and they look great against the cactus gray!! Super easy wet install as well.
And even better customer service! Installed both the stealth Ford overlay and the matte black door cup protectors. Looks great, videos are super helpful, and easy to follow along.
If you have ever installed any kind of tint or screen protector before, this install is even easier. The right combination of water with soap makes it a breeze to install.
Easy to install with a little heat. Great protection from scratches and they look good, without standing out.
Look great and will keep the cup area clean, especially having an extra set. I do highly recommend using the spray bottle for the install, I have used RapidTac vinyl installation spray before and it will make all the StickerFab decals a breeze to install.
These apply so easily. It's a little challenging to reach in behind the handle to rub out the bubbles but I got better with each one. You have to look to see that they are there and I now can avoid those fingernail scratches. Thanks.
Very easy to install. Took me about 15 min using the wet method with no heat gun to install all 5 (including the back). I purchased the carbon fiber ones and they look great!