Front Recovery Eyelets for the 2021+ Ford Bronco
Give your front end a solid, frame-mounted place to hook a shackle when you need a pull.
Frame-Mounted Front Recovery Points
If your Bronco runs a bumper without factory tow hooks or built-in recovery tabs, these eyelets give the front frame a place to attach recovery gear. They bolt directly to the frame horns at the factory mounting locations.
They fit the 2021+ Ford Bronco, 2-door and 4-door, and work with factory bumpers and most aftermarket designs.
|
 |
 |
Thick Plate, Real Hardware
Each eyelet is laser-cut and CNC-formed from 3/4-inch steel plate with a durable powder-coat finish. The pair ships with Grade 10.9 mounting hardware for both sides.
The loop takes 3/4-inch shackles or soft shackles, so you can connect the recovery gear you already carry.
|
Shackles Clip Right In
With the shackles on, the eyelets sit low and out in front where a strap or winch line can reach them. With the shackles off, they stay compact against the skid plate.
The photos show the eyelets with and without D-ring shackles. Shackles are not included.
|
 |
Installation
The eyelets bolt to the factory frame locations with the included hardware, and video instructions come with the product.
Recovery gear such as shackles, soft shackles and straps is not included. Use rated hardware and follow its working-load limits.
This Part Fits
- 2021+ Ford Bronco, 2-door and 4-door (not the Bronco Sport)
- Mounts to the factory front frame horn locations
- Works with factory bumpers and most aftermarket designs
- Driving a Raptor? Email info@stickerfab.com with your setup before you order
- Turn Offroad part number EA11-M1
Complete the Build
FAQ
Which Broncos does it fit? The 2021+ Ford Bronco, 2-door and 4-door. It is not for the Bronco Sport. If you have a Raptor, email us with your setup first. |
Does it work with my bumper? It works with factory bumpers and most aftermarket designs. If you are unsure about a particular bumper, email us before you order. |
Where do they mount? Directly to the front frame horns at the factory mounting locations. |
What hardware is included? Both eyelets and all required mounting hardware, including Grade 10.9 bolts. |
What can I connect to them? The loop is made for 3/4-inch shackles or soft shackles. Shackles are not included. |
Is there an install video? Yes. Video instructions come with the product. |
What are they made of? Laser-cut, CNC-formed 3/4-inch steel plate with a powder-coat finish. |
What is the return policy? Return terms for this product may differ from StickerFab-branded items - see our refund policy or email info@stickerfab.com before you order. |