The JB4 is the most proven plug-and-play tuner for the B58-powered Ineos Grenadier — serious power gains without touching the ECU, with full Bluetooth monitoring and 8 built-in maps from stock to race gas.
Real Tune. No Flash. No Risk to Your ECU.
The JB4 isn't a throttle booster or a placebo — it actively adjusts boost pressure, ignition timing, air-fuel ratios, and fuel trims using real-time data through a full CANbus connection. That means performance gains comparable to an ECU flash, without ever touching the ECU or risking a bricked tune.
It's fully compatible with locked ECUs. Install it, tune it, pull it — the factory ECU never knows it was there. Not VIN locked, fully transferable, fully reversible.
Full Bluetooth Control — JB4 PRO App Included
The JB4 PRO Bluetooth adapter is built right into this kit. Connect wirelessly from your iOS or Android phone to switch maps on the fly, monitor up to 40 live engine parameters, log data, read and clear fault codes, and pull free firmware updates as Burger drops new maps.
The adapter fits entirely inside the JB4 enclosure — no dangling dongles, no exposed ports, weather-protected from the start.
Stock vs JB4 — Grenadier Dyno
8 Maps — From Mild to Wild
Map 0: Stock — JB4 disabled
Map 1: +3 psi over stock (91 octane)
Map 2: +4 psi over stock (91–93 octane)
Map 3: +6 psi over stock (93+ octane)
Map 4: +8 psi over stock (race gas or 30% E85)
Map 5: +10 psi over stock (race gas or 30% E85)
Map 6: Custom tuning map
Map 7: Progressive water/methanol integration
Map 8: Valet / low boost mode
Install Takes Minutes
The JB4 uses a plug-and-play harness that connects between your engine sensors and factory ECU — no cutting, no soldering, no shop visit. The included install guide walks you through every step. Pull it out just as easily if you ever need to service the vehicle or want to transfer it to a new build.
JB4 tuner unit in billet aluminum enclosure · Plug-and-play installation harness · JB4 PRO Bluetooth adapter (pre-installed) · Access to free JB4 PRO iOS/Android app · PDF install guide · 5-year warranty
Note: 91 octane or better required for performance gains. Map 0 runs on any fuel with no performance modification.
Warranty, Reversibility & DIY Install: The Straight Answers
What owners ask before they buy a tuner, answered plainly.
Does the JB4 void my warranty?
We won't tell you any performance part is warranty-proof, and neither does Burger Motorsports: its terms state that installing a tuner can affect vehicle warranty coverage. What the JB4 does give you is the smallest footprint of any tuning option. It does not flash or rewrite the factory ECU, it installs without tools or a laptop, and it unplugs in minutes, so the vehicle can be returned to stock configuration before a service visit. In the US, a manufacturer generally has to show that a modification caused a failure before denying a related claim. Check your own warranty terms and your dealer's policy.
JB4 vs. an ECU Flash Tune
JB4 (plug-in)
ECU flash tune
Modifies factory ECU software
No
Yes
Removable
Yes, typically under 10 minutes; unplug and the vehicle runs stock
Flashing back can leave traces in the ECU
DIY install
Yes, plug-and-play harness, no laptop, no shop
Usually needs a flashing tool or tuner support
Change maps / go back to stock
From your phone over Bluetooth (stock map)
Requires a reflash
Transferable to your next vehicle
Yes, not VIN locked
Typically tied to one vehicle
Factory safety systems
Left intact; the JB4 also monitors live data and drops to bypass if something goes wrong
Depends on the quality of the tune
Quick Answers
Does the JB4 flash or change my ECU? No. It sits between the engine sensors and the factory ECU and adjusts the signals the ECU sees. The ECU software is not rewritten.
Do I need a laptop or a tuning shop? No. It uses a plug-and-play harness and a PDF install guide. Expect 20 to 30 minutes the first time while you locate the sensors, and under 10 minutes to remove it later.
How do I return the vehicle to stock? Select the stock map in the free JB4 PRO app, or unplug the unit entirely before a dealer visit.
Can I move it to another vehicle or resell it? Yes. The JB4 is not VIN locked, so it can be reinstalled on a compatible vehicle or resold.
California & CARB: This tuner is not CARB-approved for this vehicle, so we cannot ship it to California. Check local emissions rules before ordering to other states.
Cancellation / Return Notice: This product may be submitted directly to Burger Motorsports for fulfillment shortly after purchase. Once submitted to the manufacturer, the order is final and may no longer be eligible for cancellation or return.
FAQ
Will this work on my locked ECU? Yes. The JB4 is fully compatible with locked ECUs. It works between engine sensors and the ECU — it never accesses or modifies the ECU itself.
What are the power gains on a stock Grenadier? Up to 80whp and 100wtq on a completely stock Grenadier running pump gas (91+ octane). More with supporting mods, higher octane fuel, or E85 blends.
Is it reversible / will it affect my warranty? Fully reversible — unplug and remove, and the vehicle returns to 100% stock. It's not VIN locked and leaves no trace on the ECU. Burger notes that any modification can affect warranty coverage, so check your warranty terms and dealer policy. The JB4's removable, no-flash design is what keeps your options open.
Does it work on the Quartermaster pickup too? Yes — fits the 2023+ INEOS Grenadier SUV and the Quartermaster 3.0L B58 pickup version.
What does the Bluetooth app do? The free JB4 PRO app (iOS/Android) lets you switch between maps, monitor up to 40 live engine parameters, log data, read and clear fault codes, and download firmware updates — all wirelessly from your phone.
Do I need supporting mods? No — the JB4 delivers gains on a completely stock vehicle. Bolt-on upgrades, E85 blends, and larger turbochargers will unlock more, but none are required to run the unit.