Know Your Panel Before the Trail Gets Hard
The Grenadier's overhead control panel runs six off-road systems. This plate puts the activation sequence, speed limits, and requirements for all six right where you need them — at a glance, not buried in a 500-page manual.
The Progression — Start Simple, Go Deeper
The plate follows the natural off-road escalation sequence — exactly how the controls are meant to be used. Upper left is where you start every trail. Lower right is for the serious stuff.
Off-Road Mode tunes the drivetrain and throttle for loose terrain — your baseline for anything beyond pavement. From there, you work the Transfer Case to drop into Low Range as the trail demands. Then come the lockers: Rear first, then Front when the rear alone isn't enough.
The final two panels are the special modes — Wading for water crossings and Downhill Assist for controlled descents — each with their own specific prerequisites clearly listed.
|
 |
Lockers: What You Need Before You Engage
 |
Wading Mode & Downhill Assist
These two bottom-right panels cover the Grenadier's most capability-specific systems — the ones that have the most requirements and the most consequences if you get the sequence wrong.
Wading Mode requires Off-Road Mode, Low Range, and Center Diff Locked before you even press the button — and has a specific shutdown procedure after you exit the water. Downhill Assist requires lockers OFF and controlled forward speed. The plate tells you exactly what to check, so you're not improvising.
|
Installation: Under 5 Minutes
Clean the overhead console surface with isopropyl alcohol. Peel the 3M backing, align the plate to your panel, and press firmly for 30 seconds. No tools, no drilling, no modifications to your Grenadier. Fully reversible.
| Frequently Asked Questions |
|
| What model years does this fit? |
Designed for the 2024+ INEOS Grenadier Station Wagon. Based on MY2026 US Petrol spec controls — the overhead panel layout has been consistent since launch. |
| Does it work for diesel models? |
The off-road controls on diesel Grenadiers are largely the same, but we based this on the US Petrol spec manual. If you have a diesel variant, verify your activation sequences match before ordering. |
| Will it damage the headliner or trim? |
No. 3M adhesive is designed to release cleanly from automotive interior surfaces. No residue, no damage. |
| Is the information on the plate accurate? |
Yes — every speed limit, prerequisite, and activation step is taken directly from the official INEOS Grenadier MY2026 Quick Start Guide and owner's manual. Your actual manual is always the authoritative source. |
| Do you make other Grenadier interior accessories? |
Yes — we also make the Grenadier Spec Plate (factory-style data plate for the rear door) and a growing lineup of vinyl overlays and trim accessories for the Grenadier. |
Browse All Grenadier Accessories
StickerFab makes precision-fit vinyl overlays, trim kits, and reference plates for the INEOS Grenadier — all manufactured in the USA, backed by 4,600+ five-star reviews.
