Printed Series "Move Over" Signature DRL Bar Overlays
We are going to call these our "MOVE OVER" Signature DRL Bar Overlays, but they will be available in a variety of options. You just have to help us decide what to create (send us a message).
Here's a couple things we have made:
- Move Over - mirrored for when that person in front of you won't get out of the way 🤣.
- BLT WLD - if you don't know, you Google it!
- No Logo Orange - this is how you get a deeper, darker orange DRL color
The entire overlay is printed along with the tint. This allows us to dial in different designs and colors all at once.
Covered in 2.5mil laminate for long life.
Clean the application area and apply the vinyl using wet installation. Make sure the area is clean and free of dust, debris, dirt, Armor All, etc.
Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
Try doing the install in the shade so it doesn't heat up the vinyl rapidly. Video coming soon.
Keep a dish of soapy water (1 or 2 drops of dish / hand soap with a couple cups of water) around. You will want to wet the fuel door and the back of the vinyl.
Also recommend using a felt tip squeegee.
To remove after item has been installed for a while, please use Goo Gone and a clean towel / paper towel. This will dissolve the remaining adhesive. Be sure to rinse / wash the area after removal.