Direct Fit Dash Phone Mount — 2024+ Jeep Wrangler JL, 4xe & Gladiator JT
Jeep built mounting holes right into the dash of the 2024+ Wrangler and Gladiator. This mount bolts straight to them — no drilling, no bracket — and gives you a rock-solid place for your phone, tablet or CB mic.
Built for the Factory AMPS Dash Holes
The 2024+ Jeep Wrangler JL, Wrangler 4xe and Gladiator JT come from the factory with industry-standard AMPS mounting holes in the pads on top of the dash. Every kit includes an AMPS base machined from 6061-T6 aluminum that bolts directly into them, so it sits flush with an OEM look and feel.
Because it uses the holes Jeep already put there, there is nothing to drill, no multi-mount bracket, and nothing to damage.
|
 |
 |
A Solid, Clean Install
Pick your holder, attach it to the DuraLock arm, and aim it where you want it. The CNC-machined arm has stainless and aluminum internal supports and glass-filled resin knobs molded over stainless threaded inserts, so it stays put over rough trails and washboard roads.
A dash arm rest with built-in cable management is included to steady the arm and keep your charging cable tidy.
|
What It Fits
Made for the 2024+ Jeep Wrangler JL (2024-2026), Wrangler 4xe (2024-2025) and Gladiator JT (2024-2026) dash with the factory AMPS holes in the dash-top pads. Earlier model years without those holes are not covered by this listing. Have a 2018-2023 Wrangler JL, Wrangler 4xe or Gladiator JT? Use the Model Year selector near the top of this page to switch to the Slim Track dash bracket made for those years.
Choose Your Setup
Every option includes the AMPS dash base, DuraLock arm and arm rest. Pick your holder in the Configuration selector above, then choose your arm type and accent color.
20LITE Universal Phone Mount
Fits nearly all smartphones and cases, up to 3.7" wide and 0.6" thick. Octagon-shaped grips pull the phone away from the cradle back to keep heat down on hot days, and the clip-in, replaceable grips don't rely on 3M tape. The spring is tuned for vehicles, so the phone goes in and out with one hand without straining the base.
|
 |
 |
MagSafe Phone Mount (Non-Charging)
A strong, non-marring magnetic hold for any MagSafe-compatible phone or case, with strong neodymium magnets behind a rubber pad and a CNC-machined aluminum casing. Phone not magnetic? Stick on the included adhesive metal ring for the same grip. This version does not charge.
|
MagSafe Charging Phone Mount
The same magnetic grip with MagSafe wireless charging built in, so your phone charges while it is mounted and the coil stays aligned. The included adhesive metal ring gives non-MagSafe phones the same magnetic hold.
|
 |
 |
25W Qi2.2 / MagSafe Charging & Cooling Mount
Up to 25W of fast wireless charging that works with MagSafe, Qi2 and Google Pixel (Pixelsnap) phones. A thermoelectric (TEC) "ice" cooler holds your phone at a good charging temperature so it doesn't overheat and slow down.
The included USB cable and plug are required. If your Jeep doesn't have a 45W PD port on the dash, plug the cable into the 12V outlet with the included power adapter.
|
Qi2.2 Charger Troubleshooting Guide
Qi Wireless Charging Mount with LED Accent Light
An auto-sensing Qi cradle that delivers up to 15W and automatically locks the side arms and lower leg when you drop the phone in. Auto coil alignment keeps charging on target. A customizable LED accent ring comes in White, Red, Orange, Yellow, Green, Blue or Purple so you can match your interior.
Fits phones (with case) 2.45" to 3.4" wide and up to 0.625" thick. Includes a USB-C cable and a 12V adapter with dual 30W PD USB-C ports; use the adapter for full output.
|
 |
 |
Midland MXT Magnetic Mic Holder
A billet aluminum, two-part holder that replaces the hanger button on the back of your Midland MXT radio, turning the OEM mic into a robust magnetic mount. Swap the button, snap the mic on, and it's ready to grab.
|
CB Microphone Holder
An all-metal holder for most CB microphones that works with every 20mm ball mount, so it moves with you if you change your layout later.
|
 |
 |
2-in-1 CB Mic / Handheld Radio Holder
One bracket for belt-clip style handheld radios or button-style CB mics, so you can switch between them without changing the mount. Your mic or radio is not included.
|
Tablet Mount
A spring-loaded tablet holder that fits most tablets with 7" to 18.4" screens, from iPad mini to iPad Pro and Samsung Galaxy tablets. Ten bundled support legs cover the range, and the cradle opens from 6.25" to 11.5" wide. It is not compatible with the Galaxy View.
|
 |
Aluminum or Carbon Fiber Arms
Every setup comes on a CNC-machined DuraLock arm with a lightweight aluminum center tube or a rigid carbon fiber center tube. Both use the same internal support system that mechanically fastens the two socket ends together into one solid piece. Choose in the Arm Type selector.
 |
Arm Rest Included
A soft, automotive-grade rubber dash arm rest with built-in cable management comes with every kit. It supports the arm against the dash and routes your charging cable cleanly.
|
Accent Kits — Make It Yours
Every holder comes standard with black knobs. Choose a color in the Accent Kit Color selector and you get a colored set of billet aluminum hardware to swap in for the black knobs — Red, Orange, Yellow, Green, Blue, Purple or Pink.
How to Install an Accent Kit
Specifications
| Fits |
2024-2026 Jeep Wrangler JL, 2024-2025 Wrangler 4xe, 2024-2026 Gladiator JT |
| Mounting |
Factory AMPS holes in the dash-top pads. No drilling. |
| Base |
6061-T6 aluminum, CNC machined, black anodized |
| Arm |
DuraLock arm, aluminum or carbon fiber center tube, stainless and aluminum internal supports, arm rest included |
| Ball & socket |
Tackform 20 Series, 20mm (not compatible with 25.4mm / 1" B-size balls) |
| Phone holders |
20LITE up to 3.7" wide x 0.6" thick; Qi LED holder 2.45"-3.4" wide x 0.625" thick |
| Tablet holder |
7"-18.4" screens, 6.25"-11.5" wide, 10 support legs included |
| Accent colors |
Black (standard), Blue, Green, Orange, Pink, Purple, Red, Yellow |
Complete the Build
Fitment note: This mount is for the 2024-2026 Jeep Wrangler JL, 2024-2025 Wrangler 4xe and 2024-2026 Gladiator JT with the factory AMPS holes in the dash-top pads. Charging holders need the included USB cable and power adapter to work at full output. Colored accent kits swap in for the black knobs on the arm. The lifestyle photos show example setups and may not match the exact configuration you select.
FAQ
Will it fit my Jeep?
It fits the 2024-2026 Wrangler JL, 2024-2025 Wrangler 4xe and 2024-2026 Gladiator JT that have the factory AMPS holes in the dash-top pads. For 2018-2023 models, use the Model Year selector at the top of this page. |
Do I have to drill my dash?
No. It bolts directly into the AMPS holes Jeep already built into the dash. |
Which setup should I pick?
Pick 20LITE for a universal phone holder, MagSafe for a magnetic holder, a charging option to charge while you drive, a CB option for a mic or radio, or the tablet mount for a tablet. |
Aluminum or carbon fiber arm?
Aluminum is the lightweight standard black look; carbon fiber gives a rigid, woven carbon finish. Pick in the Arm Type selector. |
My phone isn't MagSafe. Will the magnetic mounts work?
Yes. The MagSafe mounts include an adhesive metal ring you stick to your phone or case. |
Do the charging holders come with a cable and charger?
Yes. They include a USB cable and a 12V car adapter. Use the adapter for full charging speed. |
Can I add a second holder?
Yes. The arm uses the 20 Series 20mm ball & socket system, so you can add or swap 20 Series holders, and a second mount can go on the other dash-top pad. |
Are the CB mic or radio included?
No. The CB options include the holder only; bring your own mic or handheld radio. |
How do the accent kits work?
Pick a color in the Accent Kit Color selector and the colored billet aluminum hardware swaps in for the black knobs on your arm. |
What is the return policy?
All orders are covered by our 30-day return policy. |
