Add a subtle but eye-catching custom touch to your 2024+ Toyota Land Cruiser, Lexus GX550, or 2025+ Toyota 4Runner with this premium third brake light overlay. Printed on clear vinyl, this one-piece overlay is designed to show off the pattern without using cutouts for the letters, creating a cleaner look that is easier to install and less likely to snag when drying your vehicle.
This Land Cruiser third brake light overlay and GX550 brake light overlay is made to let enough light pass through for visibility while adding a unique matte-finish design to the rear of your vehicle. It is a simple exterior upgrade for owners who want something different without replacing factory parts.
Not many small vinyl shops have print capabilities. This allows us to make some pretty unique designs. This product is printed on clear vinyl and just one piece. No cut outs for the letters. Nothing to snag when drying off your vehicle. Easier to install.
It blocks enough light so that you can see the design yet doesn't block so much that it makes braking unsafe.
Fits ALL 2024+ Land Cruisers / GX550. Gloss finish.
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
You will want to do this in 70-85 degree weather ideally. Stay in the shade unless it is a little on the cool side. Make sure the vinyl is flat before installation.
Recommended items:
Clean the application area to prepare it for installation. Just use a wax free detailing spray if your vehicle is not too dirty. Do not forget to clean the edges of the trim. Also wash your hands. You do not want to get dirt stuck to the adhesive side of the material. Allow area to dry.
If you do not consider yourself an AWESOME installer, do a wet install. Wet your fingers, the back of the vinyl and the trim with our StickerFab application fluid. In a pinch you can use 1 drop of dish soap mixed with 1 cup of water. Align triangle and gently push out the water under it. When dry, check final install to verify alignment. If you need to re-do it, use your backup piece. To speed up the drying process you can use a heat gun or hair dryer. Apply very low heat as to not damage the vinyl.
For a dry install, this material is pretty forgiving if installed under the right temperatures. Align the vinyl. Then push out the air carefully as to prevent creasing. Just use your fingers as the piece is small.
The adhesive reacts to PRESSSURE and HEAT.
Does this fit the 2024+ Toyota Land Cruiser, Lexus GX550, and 2025+ Toyota 4Runner?
Yes. This third brake light overlay is designed to fit all 2024+ Land Cruiser, GX550, and 2025+ 4Runner models.
Is this a one-piece overlay?
Yes. This design is printed on clear vinyl as a single piece with no cutouts for the letters.
Will the brake light still be visible?
Yes. The material is designed to block enough light to show the design while still allowing the brake light to remain visible.
Is it hard to install?
Installation is designed to be straightforward, and the page notes that the one-piece design is easier to install. A backup piece is also included.
What finish does it have?
This overlay has a matte finish.
