Covers the silver OEM lettering — acrylic-backed vinyl pieces are cut larger than the factory emblem to fully hide the stock silver for a clean, finished look.
Two ways to run it — overlay directly on the factory badge, or remove the silver emblems entirely and use this kit to restore the logo (see the removal video).
Nearly 30 color & finish options — solids, metallics, Tri Bar, 3D Carbon and more.
Comes with 2 sets of vinyl + 1 set of acrylic (except Gloss Black — see note below).
UV-resistant on printed finishes — laminated to withstand years of sun and weather.
Fits 2024+ Land Cruiser (LC250) & 07-14 FJ Cruiser — designed for the factory front grille badge.
Cut & printed in the USA — easy peel-and-stick, wet-install friendly.
Upgrade the front badge on your 2024+ Land Cruiser (LC250) or 07-14 FJ Cruiser — a little less subtle, a lot neater. Vinyl over precision acrylic.
Don't Hide Your Toyota Pride
The factory front "TOYOTA" grille badge is flat silver. This kit adds color and contrast while keeping the clean factory look. To fully cover the silver OEM emblem, each vinyl overlay is mounted on an acrylic backing cut larger than the stock letter — so there's no exposed silver and the whole badge looks sharp.
Easy to apply, and available in nearly 30 colors and finishes to match any build.
Two Ways to Run It
1. Overlay: Apply directly over the factory silver letters — the acrylic pieces cover the silver for a clean, layered look.
2. Full restore: You can also remove the factory silver emblems entirely and use this kit to rebuild the logo from scratch. See the removal transformation video below.
Note on Black options:Gloss Black does not include vinyl — the acrylic is already gloss black. Matte Black would show a small gloss border from the glossy acrylic backing, and is transitioning to a matte acrylic with no additional overlays. All other colors come with 2 sets of vinyl + 1 set of acrylic.
🛠️ Built to Last — Made in the USA
Cut from US-supplied vinyl; higher-cost printed finishes are laminated for UV protection so they hold up to years of harsh weather. Durable vinyl over precision acrylic, made in-house in the USA.
Easy Peel-and-Stick Install
Clean the factory letters with a wax-free quick detailer and microfiber.
Peel the protective paper off the top of each acrylic piece (leave the 3M adhesive backing on for now).
Test fit, remove the backing, re-align with an even gap around each OEM letter, and press down firmly.
Prefer a Full Transformation?
You don't have to overlay the factory badge — it's possible to remove the stock silver emblems entirely and rebuild the logo with this kit for a completely custom finish. Watch how it's done:
⚙️ Install Tips
Ideal install temperature is 75–85°F. If it's warm, work in the shade; if it's cool, warm the surface. Use heat and your fingers on curved areas. Recommended: quick detailer (wax-free), microfiber, and application fluid — grab our Essential Vinyl Installation Pack to have everything on hand.
This Kit Fits
Vehicle
Fits?
2024+ Toyota Land Cruiser (LC250)
✅ Front grille emblem
2007-2014 Toyota FJ Cruiser
✅ Front grille emblem
FAQ
Do these fit the 2024+ Land Cruiser? Yes — designed specifically for the 2024+ Toyota Land Cruiser (LC250) front grille badge. They also fit the 2007-2014 FJ Cruiser.
Do they cover the silver factory lettering? Yes. The acrylic backing is cut larger than the OEM letters to fully hide the factory silver.
What comes in the kit? 2 sets of vinyl and 1 set of acrylic (except Gloss Black — see the note above).
Can I remove the factory emblems instead? Yes. You can remove the stock silver emblems entirely and use this kit to restore the logo — see the transformation video above.
Notice of Non-Affiliation and Disclaimer: StickerFab is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Toyota, or any of its subsidiaries or affiliates. The name Land Cruiser as well as related names, marks, emblems and images are registered trademarks of their respective owners, including Toyota.
Easy & fast install of black overlay. Very good guality of material and matte black color blends in with the rest of the same colored OEM trims.
Z
Zachary Haggard (Petah Tikva, M, IL)
Looks great
These went on super easy and look phenomenal! The only thing I wish is that the sticky side has a lip around the outside edges of the letter to help guide the fitment. If it was possible it would make installation easier and it would have the added benefit of covering the remaining exposed grey sides of the toyota emblem on the grill. Either way, great product, easy installation. Airborne All The Way!
