License Plate Light Shrouds — 2024+ Grenadier / Quartermaster
Banish the reversing camera glare. A left and right pair that installs in minutes with your own factory screws.
Fix the Backup Camera Flare
The Grenadier's license plate lights shine out wide, and some of that light reaches the reverse camera and flares across the image — especially at night, and worse when the lens isn't perfectly clean.
StickerFab's License Plate Light Shrouds fit over the plate lamp lenses and narrow the spread of the light, so it stays on your plate and out of your camera. The result is a cleaner, easier-to-read reverse view.
|
 |
See It and Install It in One Watch
A full overview of the shrouds with a walk-through of the install. It's a quick parking-lot mod — no special tools beyond the small wrench in the bag.
- Remove the two factory screws holding each license plate lamp lens.
- Set the shroud over the lens.
- Re-install the same factory screws, then snug them with the included wrench. Repeat on the other side.
Left and right shrouds are a matched pair.
|
 |
Your Factory Screws, a Perfect Fit
Instead of making you track down replacement hardware, the shrouds are designed to go on with the factory screws you already have. Take the originals out, set the shroud on the lens, and put the same screws back — that's how you get an exact, clean fit.
A small wrench is included, so you can do the whole job in a parking lot.
|
🔧 Install — A Parking-Lot Mod
Remove the two factory screws on each license plate lamp, set the shroud over the lens, and re-install the same screws with the included wrench. Each side takes a minute or two. No drilling, no cutting, no wiring — and it's fully reversible if you ever want to go back to stock.
💡 Left and Right Pair
You get both shrouds, one for each side of the plate, so the glare is handled from either direction.
Specifications
| Fits |
2024+ INEOS Grenadier and Quartermaster |
| Includes |
Left and right shroud (pair) and a small wrench |
| Hardware |
Uses your factory license plate lamp screws |
| Install |
Bolt-on, no drilling, cutting, or wiring. Reversible. |
| Returns |
30-day returns |
Complete the Build
FAQ
What does it fix?
Glare and flare on the Grenadier's reverse camera image caused by the license plate lights shining into the lens. |
Will my plate still be lit?
Yes. The shrouds narrow the spread of the light, so your plate stays illuminated. |
Do I need new screws?
No. The shrouds reuse your factory screws. |
Do I need tools?
A small wrench is included in the kit. |
How many do I get?
A left and right pair, one for each side of the plate. |
Does it fit the Quartermaster?
Yes, it fits the 2024+ Grenadier and Quartermaster. |
Is it permanent?
No. It is bolt-on and reversible — reinstall the screws without the shrouds to go back to stock. |
Do I need to drill or cut anything?
No drilling, cutting, or wiring. |
