Printed Series 1L Tail Light Overlays
Bigfoot lives on your taillights now. Smoked, printed, and ready to turn heads on the trail.
More Than a Tint — It's a Statement
Standard tint overlays smoke your taillights and call it a day. The Printed Series goes further. Your chosen design is printed directly into the overlay film, so you get custom art and the smoked look at the same time — no layering, no gaps, no bubbles between films.
Our first design is Bigfoot / Sasquatch — a classic Pacific Northwest icon that fits perfectly on a Bronco. The full panel is covered, and the design blends with the taillight's natural translucency when lit at night.
|
|
Pick Your Smoke Level
Dark Smoke — aggressive smoked look. The Bigfoot silhouette shows strongly during the day, taillights appear dramatically darker at rest.
Light Smoke — subtler tint. The design blends more naturally in daylight while still delivering the effect when the lights are on at night.
Both options use the same 2.5mil laminate top coat — weather-resistant and UV-stable for long-term outdoor use.
|
|
⚙️ Installation — Takes About 20–30 Minutes
Wet install method. Clean the taillight thoroughly, wet both surfaces with soapy water, position and squeegee. A felt-tip squeegee is recommended. Install in shade — direct sun heats the vinyl and makes repositioning harder. Allow 24 hours cure before washing. Removal: Apply Goo Gone, let it sit for a minute, then peel from a corner. Wipe the taillight clean with a fresh cloth. No damage to the OEM taillight surface.
FAQ
|
Does each kit cover both taillights?
Yes — every order includes overlays for the driver side and passenger side.
|
Do these work with the stock LED taillights?
Yes — specifically designed for the 2021+ Bronco LED taillight signature. Not for halogen taillights.
|
|
Will the design show when the lights are off?
Yes — in Dark Smoke especially, the Bigfoot silhouette is visible during the day. Light Smoke is more subtle at rest.
|
Is this street legal?
Tint laws vary by state. We recommend the Light Smoke option for maximum brightness retention and broad compliance.
|
|
Can I request a different design?
Yes — contact us with your idea. Designs with mass appeal get listed for everyone.
|
How do I remove it?
Apply Goo Gone, let it sit a minute, then peel from a corner. Wipe clean. No damage to the OEM lens.
|
