Rear Lower Control Arm Skid Plates for the 2021+ Ford Bronco 4-Door
Heavy-duty steel skids that shield your rear lower control arm mounts and let the Bronco slide over obstacles instead of catching on them.
Protect a High-Contact Trail Spot
The rear lower control arm mounts are exposed to scrapes and impacts when you are crawling rocks, ruts and logs. These Turn Offroad skid plates put 1/4-inch steel over that area so the mounts are not taking the hit.
They are sold as a pair, so one order covers both sides.
Folded and Welded for Strength
Each skid uses a folded and welded design that adds rigidity right where trail contact happens.
The angled skid profile runs from the frame down to the lower mount, which helps the Bronco slide over rocks, ruts, logs and debris instead of hanging up on exposed suspension mounts.
Watch the Install
Turn Offroad's installation guide walks through the whole process, so you can see the mounting location and the hardware before you start.
Plan on drilling during installation. Installers commonly report about 20 to 45 minutes.
Everything in the Kit
The kit includes the left and right welded skids, the flat plates and the nut-plate strips shown here, so the parts for both sides are in the box.
Photos show the skids on a Bronco for reference. The vehicle, wheels, tires and other parts shown are not included.
Installation Notes
Installation requires drilling, so have a good drill bit on hand. A fresh, sharp bit makes the job faster. Watch the install video above before you start.
Some photos show additional machined parts, including a red-capped end plate, that are not part of this kit. Email info@stickerfab.com if you have questions about what is included.
This Part Fits
2021-2026 Ford Bronco 4-Door
Not for Raptor models
Turn Offroad part number SUSK-M4. Sold as a pair.
Heads up: These skid plates are made for the 4-Door Bronco only and are not for Raptor models. For California residents, this product carries a Prop 65 warning: it contains chemicals known to the State of California to cause cancer, birth anomalies, or other reproductive harm.
Which Broncos does this fit? It fits the 2021-2026 Ford Bronco 4-Door. It is not for Raptor models.
Does it fit the 2-door Bronco? No. This part is made for the 4-Door Bronco. Email info@stickerfab.com if you need help finding the right part for a 2-door.
What is it made from? 1/4-inch steel with a folded and welded design.
Does it come as a pair? Yes. It is sold as a pair for the rear lower control arm mounts.
Does installation require drilling? Yes, plan on drilling during installation. Turn Offroad has an installation video, shown above on this page.
How long does installation take? Installers commonly report about 20 to 45 minutes.
What is in the box? The left and right welded skids plus the flat plates and nut-plate strips shown in the kit photo. Vehicle, wheels and tires are not included.
What is the return policy? Return terms for this product may differ from StickerFab-branded items - see our refund policy or email info@stickerfab.com before you order
