Assault Track Picatinny Dash Bracket Phone Mount — 2021+ Ford F-150 & F-150 Lightning
The most rugged all-metal dash mount for your F-150, with a bold, tactical Picatinny rail. Check the year and trim list below, pick your holders, and you're done.
This Part Fits
Compatibility matters on this one. Only the years and trims below are supported, and some are limited to specific trim codes.
| Ford F-150 2021-2023 |
All trim levels, including Raptor |
| Ford F-150 2024 |
XL, STX, XLT, Tremor [401A ONLY], Lariat [501A ONLY], Platinum [701A ONLY] |
| Ford F-150 2025 |
XL, STX, XLT, Tremor [401A ONLY], Lariat, Platinum [701A ONLY] |
| Ford F-150 2026 |
XL, STX, XLT, Tremor [401A & 401B ONLY], Lariat, King Ranch, Tremor High [402A ONLY], Platinum [700A ONLY], Platinum Standard [701A ONLY] |
| Ford F-150 Lightning 2022-2023 |
Pro & XLT ONLY |
| Ford F-150 Lightning 2024-2025 |
XLT ONLY |
Built to Match Your F-150's Dash
Each bracket is built from high-strength steel with a powder-coated finish and designed from a laser scan of the F-150 dashboard, so it follows the contours of the dash. The finish blends in for an OEM look and feel.
The Assault Track uses a CNC machined billet aluminum Picatinny rail (the mil-spec rail used on tactical gear), so it comfortably holds up to four devices and you can add, remove or reposition a mount in seconds with nothing more than a house key. No more fumbling with nuts under a panel.
|
 |
 |
No Drilling Required
Many dash brackets make you drill into the dash. This one holds on even the roughest terrain using 3M tape only, and it can be removed years later without damaging your dash.
Prefer nuts and bolts? The legs have pre-drilled through-holes and the necessary mounting hardware is included.
|
Choose Your Setup
Every option includes the same F-150 dash bracket. Pick your setup in the Configuration selector above, then choose an arm type and accent color.
20LITE Universal Phone Mount
The 20LITE universal holder fits nearly all smartphones and cases, up to 3.7" wide and 0.6" thick. The replaceable octagon-shaped grips pull the phone away from the back of the cradle to reduce heat transfer on hot days, and they clip in with no adhesive tape. The spring is calibrated for vehicles so the phone goes in and out with one hand.
|
 |
 |
Dual 20LITE Phone Mounts
Two 20LITE universal holders on one bracket, so you can run a phone and a second device (a work phone or a GPS) at the same time.
|
20LITE Phone Mount + Tablet Holder
A 20LITE phone holder plus a spring-loaded tablet cradle for iPads and other tablets with 7" to 18.4" screens.
|
 |
 |
Tablet Holder
A spring-loaded tablet cradle for iPads from the mini to the Pro, Samsung Galaxy tablets and other devices with 7" to 18.4" screens. It ships with different legs to fit different sizes.
|
MagSafe Phone Mount (Non-Charging)
A secure magnetic hold for any MagSafe-compatible phone or case. If your phone isn't magnetic, stick on the included metal ring for the same grip. This mount does not charge the phone.
|
 |
 |
Dual MagSafe Phone Mounts (Non-Charging)
Two MagSafe holders on one bracket, for two phones or a phone and another magnetic device.
|
MagSafe Charging Phone Mount
The same magnetic hold with wireless charging built in, so your phone charges while it is mounted. The included metal ring gives non-MagSafe phones the same grip and charging.
|
 |
 |
25W Qi2.2 / MagSafe Charging & Cooling Mount
Up to 25W of fast wireless charging for MagSafe, Qi2 and Google Pixel (Pixelsnap) phones. A thermoelectric (TEC) ice cooler keeps your phone at an optimal charging temperature so it doesn't overheat and slow down.
Use the included 12V car charger for full charging speed.
|
 |
Dash Bracket Only
The bare F-150 bracket with the Assault Track Picatinny rail, for when you already own 20 Series holders or want to build your own layout one piece at a time.
|
Arm Type and Accent Kits — Make It Yours
Setups with a holder come with a DuraLock arm that has an aluminum or rigid carbon fiber center tube and an internal support system. Every holder comes standard in black. Choose a color to get billet aluminum accent hardware in Blue, Green, Orange, Pink, Purple, Red, or Yellow.
How to Install an Accent Kit
Installation
🔧 Installs in Minutes
Clear step-by-step instructions and all necessary hardware are included. Use the 3M tape for a no-drill install, or the pre-drilled through-holes and included hardware if you prefer nuts and bolts. Charging holders plug into a 12V outlet with the included cable and adapter.
Adding More Holders Later
Specifications
| Fits |
2021-2023 F-150 (all trims, including Raptor); 2024-2026 F-150 and 2022-2025 F-150 Lightning in select trims only. See the "This Part Fits" list above. |
| Material |
High-strength steel, powder coated |
| Top plate |
Assault Track: CNC machined billet aluminum Picatinny rail, takes the 20 Series 20mm ball & socket system, holds up to four devices |
| Install |
No drilling: 3M tape, or pre-drilled legs with included hardware |
| Arm |
DuraLock arm, aluminum or carbon fiber center tube (holder setups) |
| Holders |
20LITE phone (up to 3.7" wide x 0.6" thick), MagSafe, MagSafe charging, Qi2.2 25W charging & cooling, tablet (7"-18.4") |
| Accent colors |
Black (standard), Blue, Green, Orange, Pink, Purple, Red, Yellow |
Complete the Build
Fitment note: This bracket fits only the F-150 and F-150 Lightning years and trims listed above. Many trims are limited to the trim codes shown, so check yours before you order. If you aren't sure, email info@stickerfab.com with your year, model and trim and we'll confirm. Charging holders need the included cable and 12V car charger for full power. The lifestyle photos show example setups and may not match the exact configuration you select.
FAQ
|
Will it fit my F-150?
All trims of the 2021-2023 F-150, including the Raptor, are supported. For 2024-2026 and the F-150 Lightning only certain trims and trim codes fit, so check the "This Part Fits" box for yours.
|
Does it fit the F-150 Raptor?
Yes, on the 2021-2023 F-150 Raptor. For 2024 and newer, only the trims listed in the "This Part Fits" box are supported. If you aren't sure, email info@stickerfab.com with your year and trim and we'll confirm before you order.
|
|
Do I have to drill?
No. It mounts with 3M tape and can be removed later without damaging the dash. Pre-drilled through-holes and hardware are included if you prefer a nut-and-bolt install.
|
Which setup should I pick?
Pick Dash Bracket Only if you own 20 Series holders already. Pick 20LITE for a universal holder, MagSafe for a magnetic holder, a charging option to charge while you drive, or add a tablet holder.
|
|
Aluminum or carbon fiber arm?
Both use the same DuraLock arm with an internal support system. The center tube is either aluminum or rigid carbon fiber, so pick the look you prefer. Bracket-only orders don't include an arm.
|
My phone isn't MagSafe. Will the magnetic mounts work?
Yes. They include a metal ring you stick to your phone or case.
|
|
Do the charging holders come with a charger?Do the charging holders come with a charger?
Yes. They include a cable and a car charger adapter. Use the 12V adapter for full charging speed.
|
Can I add more holders later?
Yes. The Assault Track rail takes the 20 Series 20mm ball & socket system, so you can add or swap holders at any time.
|
|
Do the accent colors change the bracket?
The accent kit adds colored billet aluminum hardware. The bracket itself keeps its black finish.
|
What is the return policy?
All orders are covered by our 30-day return policy.
|
