Slim Track Dash Bracket Phone Mount — 2024+ Ford F-150
The most rugged all-metal dash mount for your F-150. Check the trim list below, pick your holders, and you're done.
This Part Fits
Compatibility matters on this one. Only the trims below are supported, and some are limited to specific trim codes.
| Ford F-150 |
2024+ with the following trims only:
Raptor
Tremor [402A ONLY]
Lariat [502A ONLY]
Platinum [702A & 703A ONLY]
King Ranch |
Own a 2021-2023 F-150, or a 2024+ with a different trim code? This bracket only fits the 2024+ trims listed above. The 2021-2023 F-150 (all trims, including Raptor) and the 2024-2026 trims with other trim codes (for example Tremor [401A], Lariat [501A], Platinum [701A]) use our
Slim Track Dash Bracket for the 2021+ F-150 & F-150 Lightning. Not sure which one you need? Email info@stickerfab.com with your year and trim.
Built to Match Your F-150's Dash
Each bracket is CNC-machined from 6061-T6 aluminum and designed from a laser scan of the F-150 dashboard, so it follows the contours of the dash. The hardcoat anodized finish blends in for an OEM look and feel and resists corrosion and wear.
The bracket replaces your factory OEM trim bezel and mounts with two existing radio bolts plus two additional rear screws. If you ever want to go back to stock, your OEM bezel conceals the holes.
|
 |
 |
Telescoping Arm
The 7.5"-9.25" telescoping arm extends and retracts so you can dial in the exact reach and viewing distance for your phone or tablet, and it locks securely once you set it.
|
Choose Your Setup
Every option includes the same F-150 dash bracket and telescoping arm. Pick your setup in the Configuration selector above.
Dual 20LITE Phone Mounts
Two 20LITE universal holders on the Slim Track plate, so you can run a phone and a second device (a work phone or a GPS) at the same time. Each cradle fits nearly all phones and cases, up to 3.7" wide and 0.6" thick.
|
 |
 |
20LITE Universal Phone Mount
One 20LITE universal holder. The replaceable octagon-shaped grips pull the phone away from the back of the cradle to reduce heat transfer on hot days, and they clip in with no adhesive tape. The spring is calibrated for vehicles so the phone goes in and out with one hand.
|
20LITE Phone Mount + Tablet Holder
A 20LITE phone holder plus a spring-loaded tablet cradle for iPads and other tablets with 7" to 18.4" screens.
|
 |
 |
20LITE Phone Mount + Magnetic Radar Detector Holder
A 20LITE phone holder plus a magnetic radar detector holder on the same Slim Track plate, so both stay in your line of sight.
|
MagSafe Phone Mount (Non-Charging)
A secure magnetic hold for any MagSafe-compatible phone or case. If your phone isn't magnetic, stick on the included metal ring for the same grip. This mount does not charge the phone.
|
 |
 |
Dual MagSafe Phone Mounts (Non-Charging)
Two MagSafe holders on the Slim Track plate, for two phones or a phone and another magnetic device.
|
MagSafe Phone Mount + Tablet Holder
A MagSafe magnetic phone holder plus a tablet cradle for 7" to 18.4" screens.
|
 |
 |
MagSafe Phone Mount + Magnetic Radar Detector Holder
A MagSafe phone holder plus a magnetic radar detector holder on the same plate.
|
MagSafe Charging Phone Mount
The same magnetic hold with wireless charging built in, so your phone charges while it is mounted. The included metal ring gives non-MagSafe phones the same grip and charging.
|
 |
 |
25W Qi2.2 / MagSafe Charging & Cooling Mount
Up to 25W of fast wireless charging for MagSafe, Qi2 and Google Pixel (Pixelsnap) phones. A thermoelectric (TEC) ice cooler keeps your phone at an optimal charging temperature so it doesn't overheat and slow down.
Use the included 12V car charger for full charging speed.
|
Qi Wireless Charging Phone Mount
A spring-loaded cradle with Qi wireless charging built in. Drop in a Qi-compatible phone and it charges while mounted.
|
 |
 |
Dash Bracket Only
The bare F-150 bracket with the Slim Track top plate, for when you already own 20 Series holders or want to build your own layout.
|
Accent Kits — Make It Yours
Every holder comes standard in black. Choose a color in the Accent Kit Color selector to get billet aluminum accent hardware in Blue, Green, Orange, Pink, Purple, Red, or Yellow.
How to Install an Accent Kit
Installation
🔧 Installs in Minutes
Remove the factory trim bezel, then mount the bracket with the two existing radio bolts and the two rear screws. Attach your holders and you're done. Charging holders plug into a 12V outlet with the included cable and adapter.
Adding More Holders Later
Specifications
| Fits |
2024+ Ford F-150 Raptor, Tremor [402A only], Lariat [502A only], Platinum [702A & 703A only], King Ranch. See the list above. |
| Material |
6061-T6 aluminum, CNC machined, hardcoat anodized |
| Arm |
7.5"-9.25" telescoping arm |
| Top plate |
Slim Track, takes the 20 Series 20mm ball & socket system |
| Install |
Replaces the factory trim bezel using two radio bolts and two rear screws |
| Holders |
20LITE phone (up to 3.7" wide x 0.6" thick), MagSafe, MagSafe charging, Qi2.2 25W charging & cooling, Qi charging, tablet (7"-18.4"), magnetic radar detector |
| Accent colors |
Black (standard), Blue, Green, Orange, Pink, Purple, Red, Yellow |
Complete the Build
Fitment note: This bracket fits only the 2024+ F-150 trims listed above. Tremor, Lariat and Platinum are limited to the trim codes shown, so check yours before you order. If you aren't sure, email info@stickerfab.com with your year and trim and we'll confirm. Charging holders need the included cable and 12V car charger for full power. The lifestyle photos show example setups and may not match the exact configuration you select.
FAQ
|
Will it fit my F-150?
It fits the 2024+ F-150 Raptor, Tremor [402A only], Lariat [502A only], Platinum [702A & 703A only] and King Ranch. Check the "This Part Fits" box for the exact trim codes.
|
Can I go back to stock?
Yes. The bracket uses the existing radio bolts plus two rear screws, and your OEM trim bezel covers the holes if you reinstall it.
|
|
Which setup should I pick?
Pick Dash Bracket Only if you own 20 Series holders already. Pick 20LITE for a universal holder, MagSafe for a magnetic holder, a charging option to charge while you drive, or add a tablet or radar detector holder.
|
My phone isn't MagSafe. Will the magnetic mounts work?
Yes. They include a metal ring you stick to your phone or case.
|
|
Do the charging holders come with a charger?
Yes. They include a cable and a car charger adapter. Use the 12V adapter for full charging speed.
|
Can I add more holders later?
Yes. The Slim Track plate takes the 20 Series 20mm ball & socket system, so you can add or swap holders at any time.
|
|
Do the accent colors change the bracket?
The accent kit adds colored billet aluminum hardware. The bracket itself stays black anodized.
|
What is the return policy?
All orders are covered by our 30-day return policy.
|
