Dash Clip Phone Mount — 2021+ Ford Bronco
An all-metal dash mount for your phone, CB mic, or tuner. Pick the holder that fits how you drive, pick your color, and clip it right above the screen.
⚠️ Not for the leatherette stitched dash. This clip is made for the standard Bronco dash. It does not fit Broncos with the stitched leatherette dash top including Bronco Raptor. If you are not sure which dash your Bronco has, message us before you order.
Built for the Bronco Dash
Using laser scanning, this dash clip is shaped to match the contours of the 2021+ Ford Bronco dash. It is built from 6061-T6 aluminum, CNC machined for strength, with a hardcoat anodized finish that looks like it came from the factory and blends with your interior.
It attaches to the front of the dash, right above the screen, so your phone stays in your line of sight and out of the way of your controls.
|
 |
 |
Small Footprint, Wide Install Range
The top dash clip gives you a much wider range of positions across the dash than comparable clips, which usually offer about half the range. Slide it where it works best for you and your phone.
Every clip includes a 20mm metal ball and a short-reach adapter so you can run a compact setup or reach out further with an arm.
|
Choose Your Setup
Every option includes the same all-metal Bronco dash clip with a 2" arm. Choose your holder in the Configuration selector above (clip only has no arm or holder).
MagSafe Phone Mount (Non-Charging)
Made for any MagSafe-compatible phone or MagSafe case, with a secure, non-marring magnetic hold. Don't have a MagSafe phone? A sleek adhesive metal ring is included so any phone gets the same reliable magnetic grip. This holder does not charge your phone.
|
 |
 |
MagSafe Charging Phone Mount
The same magnetic hold with MagSafe wireless charging built in, plus an advanced cooling fan to keep your phone protected during use. A metal adhesive ring is included for phones that are not MagSafe compatible.
|
Qi2.2 / MagSafe Charging & Cooling Mount
Up to 25W of wireless power for MagSafe, Qi2, and Google Pixelsnap phones. A built-in TEC “ice” cooling module holds your phone at a safe charging temperature so it doesn't overheat on hot days or long drives.
Use the included high-power 12V car charger and cable for full-speed charging. A standard USB port will not give full power.
|
 |
 |
Qi Wireless Charging Mount with LED Accent Ring
An auto-sensing cradle with up to 15W wireless charging. Smart sensors lock the side arms and lower leg the second you drop your phone in, for easy one-handed use. A USB-C cable and a 12V car adapter with dual 30W PD USB-C ports are included. A customizable LED ring offers 7 colors (White, Red, Orange, Yellow, Green, Blue, Purple) to match your interior or accent kit.
Your phone, including its case, should be 2.45" to 3.4" wide and no more than 0.625" deep.
|
20LITE Universal Phone Mount
Fits nearly any phone, with or without a case, up to 3.7" wide and 0.6" thick. Replaceable, injection-molded octagon grips pull the phone away from the cradle back to reduce heat transfer on hot days, and clip in without tape. The spring is tuned for vehicles, so you can drop your phone in and take it out with one hand.
|
 |
 |
Magnetic Phone Mount (Metal Plates)
An engineered polymer cradle with a swivel connection and 4 high-strength neodymium magnets that handles rough roads. Two rectangular metal plates are included to stick to the back of your phone or case.
Note: this one is not MagSafe compatible. It needs a metal plate on your phone or case. For a MagSafe phone, choose the MagSafe Phone Mount.
|
Quad Lock MAG Head
A Quad Lock MAG™ head with a magnet array that keeps your phone mounted straight every time. Hold the phone up to the mount and let the magnets do the work.
Note: the Quad Lock MAG head needs a Quad Lock MAG case or MAG Universal Adaptor (not included).
|
 |
 |
Quad Lock MAG Wireless Charging Head
The same Quad Lock magnetic interface with wireless charging built into the head, so your phone charges while it's mounted. It needs the same Quad Lock MAG case or MAG Universal Adaptor.
|
Dual-T / Cobb Tuner Mount
A universal Dual-T (2-prong) mount that connects to your Cobb Accessport and most other name-brand monitors and tuners that use the 2-prong mounting system.
|
 |
 |
CB Microphone Holder
A billet aluminum holder for CB mics that use a standard button-style rear attachment, compatible with most popular brands. The holder carries a 20mm ball on the Type-B interface, so you can swap to other ball sizes (17mm, 25.4mm, and 26mm balls sold separately) to match the system you prefer.
|
2-in-1 CB Microphone / Radio Holder
An all-metal holder designed by Expedition Essentials and made by Tackform. It holds a wide range of CB microphones and handheld radios, including belt-clip and button-style attachments, and works with all 20mm mounting solutions.
|
 |
 |
Dash Clip Only
Just the clip with its 20mm metal ball and short-reach adapter, for when you already own a 20 Series arm and holder or want to build your own setup. It is the most affordable way in. Arm and holder are not included.
|
Accent Kits — Make It Yours
Every holder comes with black knobs as standard. Pick a color in the Accent Kit Color selector and you get a colored set of billet aluminum hardware to swap in for the black knobs — Blue, Green, Orange, Pink, Purple, Red, or Yellow.
On 5" to 12" DuraLock tube arms you can swap the black accent ring for a colored one too. DuraLock arms in 2" to 3.5" lengths, all telescoping arms, and all 26 Series and 38 Series components take the colored knobs only — they are not compatible with accent rings.
How to Install an Accent Kit
Installation
🔧 Installation — Clips Right On
Step-by-step instructions and all the hardware you need are included. The clip secures to the dash with the provided hardware: no drilling, no cutting. Attach your holder, set your angle, and you're done. Charging holders plug into your 12V outlet with the included cable and adapter.
Specifications
| Fits |
2021+ Ford Bronco (non-Raptor) with the standard dash. Not for the leatherette stitched dash. |
| Material |
6061-T6 aluminum, CNC machined, hardcoat anodized |
| Connections |
20mm metal ball with Type-B interface, 20 Series compatible |
| Arm |
2" arm included with every setup except Dash Clip Only |
| Install |
Clips onto the dash with included hardware. No drilling. |
| Accent colors |
Black (standard), Blue, Green, Orange, Pink, Purple, Red, Yellow |
| Weight |
About 2 oz (clip only) to 16 oz (charging setups), depending on setup |
Complete the Build
FAQ
|
Will it fit my Bronco?
It fits the 2021+ Ford Bronco with the standard dash. It does not fit the Bronco Raptor, or any Bronco with the leatherette stitched dash. If you are unsure which dash you have, message us before ordering.
|
How do I know if I have the leatherette stitched dash?
The leatherette dash has a padded, stitched leather-look surface on top, instead of the standard molded textured dash. If you can see stitching on the dash top, do not order this clip. Send us a photo and we'll help you check.
|
|
Do I have to drill my dash?
No. The clip secures with the included hardware, so there is no drilling or cutting.
|
Which setup should I pick?
Pick Dash Clip Only if you already own a 20 Series arm and holder. Pick MagSafe or Quad Lock for a magnetic hold, 20LITE for a universal grip, a charging option to charge on the go, Dual-T for a Cobb tuner, or a CB option for your mic or radio.
|
|
My phone isn't MagSafe. Will the magnetic mounts work?
Yes. The MagSafe mounts include an adhesive metal ring, and the Magnetic Phone Mount includes two metal plates. The Quad Lock heads need a Quad Lock MAG case or MAG Universal Adaptor (not included).
|
Do the charging holders come with a charger?
Yes. They include a cable and a 12V car charger. Use the 12V charger for full charging speed, not a standard USB port.
|
|
Do the accent colors fit every arm?
Colored knobs fit DuraLock arms. Colored accent rings fit 5" to 12" DuraLock tube arms only.
|
Can I remove it later?
Yes. It clips on without drilling or adhesive on your dash, so it comes off cleanly.
|
