Give your 2021-2026 Ford Bronco 2.7L EcoBoost more airflow, more power, and that unmistakable turbo spool — a dyno-proven K&N 63-2619 Aircharger intake system.
Dyno-Proven Power for the 2.7L EcoBoost
The K&N Aircharger is engineered to feed your twin-turbo 2.7L more clean, cool air — good for an estimated 16.93 horsepower gain at 3,695 RPM. A rotationally-molded high-density polyethylene (HDPE) intake tube increases air volume to the engine and delivers a guaranteed increase in horsepower and torque.
You'll also hear it. The freer-flowing tube and filter let more of that EcoBoost turbo spool through — a noticeable difference the moment you get on the throttle.
Enclosed Air Box, Cooler Intake Charge
An enclosed air box design shields the filter and inlet air from the heat of the engine bay, so your intake pulls in cooler, denser air for a more effective power gain.
The air box lid pops off for quick, tool-free access whenever the filter needs attention — no wrestling with clamps or brackets.
Washable Filter That Lasts 100K Miles
At the heart of the system is a washable, reusable K&N High-Flow Air Filter with oiled cotton media. The oversized conical design flows big and filters hard.
Under normal highway driving you can go up to 100,000 miles between filter services — clean it, re-oil it, and reinstall. No more disposable paper filters.
Install in Under 90 Minutes
Remove the factory air box and intake tube.
Drop in the K&N heat-shield air box and mount the HDPE intake tube.
Install the High-Flow oiled-cotton filter and secure the clamps.
Reconnect the sensor and you're done — no tune required.
Typical install is 60-90 minutes with simple hand tools.
CARB note: This intake is not legal for sale or use in California on pollution-controlled motor vehicles. Legal in all other 49 states.
This Part Fits
2021-2026 Ford Bronco 2.7L EcoBoost V6 — Base, Big Bend, Black Diamond, Outer Banks, Badlands, Wildtrak, First Edition & Heritage Limited Edition.
FAQ
Does this fit my Bronco? Yes — it's engineered for the 2021-2026 Ford Bronco with the 2.7L EcoBoost V6, all trims listed above. It does not fit the 2.3L 4-cylinder.
Do I need a tune? No. It's a direct bolt-on that works with your factory ECU — no tuning required.
How often do I clean the filter? Up to every 100,000 miles under normal highway driving. Clean and re-oil with a K&N recharger kit and reinstall — it's reusable for life.
Will it void my vehicle warranty? No. K&N backs it with a No-Hassle Lifetime Limited Warranty and it will not void your factory vehicle warranty.
