This topo theme is popular in the offroad community if you can get your hands on the right designs and templates. We are covering the plain panel underneath the steering wheel. This combines perfectly with our other items and helps create a balanced, symmetrical space.
This material is specially designed to stick to textured plastic. It's easy to install and can cover up minor imperfections and discolorations.
Currently fits ALL 2023+ Broncos with the parking switch style "B". Matte finish.
NOTE: Build date on your vehicle should be AFTER 9/18/2022.
While StickerFab caters to a large number of people, it is still possible to customize some orders. Ideas that have broad appeal are the best! However, if you have some art work, we may be able to do a special print just for you.
Please refrain from submitting trademarked content unless you have the rights to it. We are located in Fort Myers, FL if you are interested in helping us create custom templates for other vehicles or trim levels.
Use our contact form to get in touch with us.
See overview / install video above. NOTE: All topo vinyls are shipped in tubes to prevent damage. Prior to install, lay out all of these items and make sure they are flat prior to install.
The process is similar for this product. Just make sure you align the cutout first and then go from there. You can also remove the panel by removing the two automotive fasteners holding it in.
You will want to do this in 70-80 degree weather ideally. Stay in the shade unless it is a little on the cool side.
Recommended items:
Prep by cleaning them thoroughly. You can use isopropyl alcohol, however if it is cold or humid, please wait a few minutes to make sure that they area is dry.
Do a dry install, but be careful not to crease the vinyl. This material is pretty forgiving if installed under the right temperatures. You can lift the vinyl multiple times to reposition. Once the alignment is correct, push out the air with your fingers. Use firm pressure to activate adhesive for the final pass. If it is cooler outside, use heat to activate the adhesive as well.
