A subtle, blacked-out wordmark by day that lights up red the moment you hit the brakes.
This third brake light overlay is precision-made for the 2024+ INEOS Grenadier. It adds a unique matte-finish design to the rear of your Grenadier while keeping everything factory underneath — no wiring, no bulbs, no permanent modifications.
Printed on clear vinyl as a single piece with no cutouts for the letters, it creates a cleaner look that's easier to install and won't snag when you're drying off your vehicle. By day it reads as a subtle blacked-out wordmark; the instant you brake, the design glows red through the overlay.
It blocks enough light to show off the design, yet not so much that it makes braking unsafe.
 Installed — Rear View
|
 Lit — Brake Applied
|
 |
 |
 |
|
Do this in 70–85°F, ideally in the shade unless it's on the cooler side. Make sure the vinyl is flat before you start. Clean the application area with a wax-free detailer, clean the edges of the trim, and wash your hands so no dirt reaches the adhesive. Let the area dry. For a wet install, wet your fingers, the back of the vinyl, and the trim with StickerFab Application Fluid (in a pinch, 1 drop of dish soap in a cup of water). Align the design and gently push out the fluid underneath. Once dry, check alignment — if you need to redo it, use your backup piece. A hair dryer or heat gun on low speeds drying. Prefer a dry install? This material is forgiving at the right temperature — align, then push out air carefully with your fingers to avoid creasing. The adhesive reacts to pressure and heat. |
 |
General overlay install technique — a Grenadier-specific video is on the way.
Recommended items:
While StickerFab caters to a large number of people, we can often customize orders. Ideas with broad appeal work best, but if you have artwork we may be able to do a special print just for you (military themed, patriotic, clubs and organizations, and more). Please don't submit trademarked content unless you own the rights. Reach us through our contact form.
|
Does this fit the 2024+ INEOS Grenadier? |
Is this a one-piece overlay? |
|
Will the brake light still be visible? |
Is it hard to install? |
|
What finish does it have? |
Where is it made? |
