Bi-LED projector optics — a Type 1 Ishida Bi-LED projector with Torus low-beam assist and a high-beam reflector assist for a wide, bright low beam and a long high beam
DOT / FMVSS108 compliant out of the box — legal for on-road use, with an optional Supercharged driver upgrade for off-road use
Choose your version — the full-feature XB Evo (white or amber DRL, sequential signals, welcome sequence, frost-free lens heater) or the lower-cost XB Evo Hybrid
Optional Supercharged Drivers add roughly 30-50% more low-beam and high-beam output — pick them right in the option selector
Plug-and-play OE fit — factory mounting points and connectors, no dash errors or flicker, vertical aim adjustable ±6°
UV-hardened polycarbonate lens with OE-grade Osram and Nichia LEDs, designed, engineered and tested in the USA
5-year Morimoto warranty — fits the 2025+ Toyota 4Runner
XB Evo LED Headlights for the 2025+ Toyota 4Runner
Morimoto's all-new XB Evo is a DOT-compliant Bi-LED headlight upgrade built to OE specifications for the 2025+ Toyota 4Runner. Pick the full-feature XB Evo or the XB Evo Hybrid, with an optional Supercharged driver upgrade for off-road use.
Bi-LED Optics, Maximum Performance
The XB Evo uses a new generation of Morimoto Bi-LED projectors with side-specific Torus optics for a wide, bright low beam and a high beam that reaches far down the road. The optics are powered by OE-grade automotive LEDs from Osram and Nichia.
Out of the box the LEDs are driven at about half of their potential intensity so the lights stay within DOT / FMVSS108 limits. The vertical aim is fully adjustable within ±6 degrees for a perfect alignment, even on a lifted 4Runner.
Your DRL and Turn Signals, Your Way
On the full XB Evo, a plug-in mode selector key on the back of each headlight lets you run the daytime running light in white or amber full-time with no loss of intensity, and choose sequential or fade-off turn signals. Four pairs of keys and two key extensions are included.
The XB Evo Hybrid keeps things simple: a fixed bright white DRL with a fade-off turn signal. When the optional Supercharged drivers are installed on the Hybrid, they also activate the welcome sequence.
XB Evo vs. XB Evo Hybrid
Both fit the same trucks, install the same way and carry the same 5-year warranty.
The full-feature XB Evo has a patent-pending heating system that warms the lens surface to minimize frost buildup in wet and snowy weather. When the temperature drops below 41°F / 5°C, flash the high beams four times to turn it on, and it automatically holds temperature within the housing. A 50W logic-controlled ceramic heater with circulation fans does the work.
Both versions also use a polycarbonate lens with a new hard coating that Morimoto says exceeds OE Toyota headlights in resistance to cracking, fading and yellowing from UV exposure.
Morimoto XB Evo Overview and Install
Video shows the same XB Evo headlight installed on a Tacoma.
Optional Supercharged Drivers
Want even more light for trails and night runs? Choose Supercharged Drivers in the option selector. They are a direct replacement for the standard DOT-spec drivers on the bottom of each housing and boost low-beam and high-beam output by roughly 30-50%, without sacrificing reliability or the Morimoto warranty.
Three color-coded status LEDs on each driver (red for DRL power, green for low beam, blue for high beam) make setup and troubleshooting simple. Because the output exceeds DOT limits, the Supercharged Drivers are for off-road use only.
Street-legal vs. off-road use: The XB Evo and XB Evo Hybrid are designed to meet DOT / FMVSS108 out of the box. Installing the Supercharged Drivers results in non-compliant peak beam intensity and should not be used on public roads, and it cannot be reversed without reinstalling the standard DOT-spec drivers. It is the installer's responsibility to follow all state and local laws. Once the Supercharged Drivers are installed, the headlights are not eligible for return.
Bolt-On Install, No Modifications
The XB Evo is built to OE specifications. It bolts to the factory mounting points, lines up with the surrounding sheet metal and plugs into the factory harness, with no dash errors, flicker, flashing or radio interference, and no factory-warranty-voiding modifications. You will need a trim removal tool, a ratchet with extension and 10 mm socket, and a #2 Phillips screwdriver.
Note: Designed for North American vehicles. Left-hand-drive / right-hand-traffic cut-off only. Use the option selectors to choose the XB Evo or XB Evo Hybrid, and standard DOT drivers or Supercharged Drivers.
What's in the Box
XB Evo: 1x driver-side and 1x passenger-side headlight · 1x DRL relay · 1x power harness · 1x fuse tap · 2x magnet-mount resistors · 2x input adapters · 4 pairs of mode selector keys · 2x mode selector key extensions XB Evo Hybrid: 1x driver-side and 1x passenger-side headlight · 1x DRL relay · 1x power harness · 1x fuse tap · 2x magnet-mount resistors · 2x input adapters Supercharged option adds: 2x Supercharged LED drivers, 8x screws and a packet of dielectric grease.
Specifications
Traffic pattern
LHD / right-hand traffic only (US / CA standard)
Output
DOT (FMVSS108) compliant (LB2V and UB2)
Main optic
Type 1 Ishida Bi-LED projector
Functions
XB Evo: low, high, park, turn, DRL, welcome, lens heating · Hybrid: low, high, park, turn, DRL
Side marker
Amber side reflex reflector (DOT compliant)
Lens
Polycarbonate with proprietary anti-UV hard coating
Warranty, Shipping & Returns: The Straight Answers
What owners ask before buying headlights, answered plainly.
Warranty: 5-year limited Morimoto warranty. It does not cover modifications, alterations or misuse. If anything looks wrong at install, photograph or video it and contact us before removing the lights.
Shipping: ships to the lower 48 United States only (no Alaska, Hawaii, APO/FPO or international).
Returns: 30-day returns on unused, unmodified headlights. Once the Supercharged Drivers have been installed, the product is not returnable.
Which years and trims does this fit? 2025+ Toyota 4Runner, all trims. They bolt to the factory mounting points and plug into the factory connectors.
Are they street legal? Yes. Both versions are DOT / FMVSS108 compliant out of the box. Installing the optional Supercharged Drivers makes the output non-compliant for public roads.
XB Evo or XB Evo Hybrid? The XB Evo adds configurable white or amber DRL, sequential or fade-off turn signals, a welcome sequence, a frost-free lens heater, and a second set of assist optics. The Hybrid drops those features to hit a lower price, but keeps the same Bi-LED projector, OE fit and 5-year warranty.
Do I need the Supercharged Drivers? No. The standard drivers already deliver strong, compliant output. The Supercharged Drivers are an off-road upgrade for owners who want roughly 30-50% more light and accept that the output is not road legal.
Can I add the Supercharged Drivers later? Yes. They are a direct replacement for the standard drivers on the bottom of each housing. Once installed, you can only return to compliant intensity by reinstalling the standard DOT-spec drivers.
Why do my signals hyper-flash? If the vehicle has aftermarket tail lights, side markers or other non-OEM exterior lighting, mismatched impedance can cause hyper-flash or sequential-signal issues. This is not a headlight defect. Morimoto or OEM lighting avoids it.
How does the frost-free heater work? On the XB Evo, when the temperature is below 41°F / 5°C, flash the high beams four times to turn it on. It then automatically holds the lens temperature to reduce frost buildup. The Hybrid does not have a lens heater.
Is installation hard? Expect to remove the upper radiator cover and front bumper cover to pull the stock lights. A trim removal tool, ratchet with 10 mm socket and a #2 Phillips screwdriver are all you need. The install guide PDF above walks through it step by step.