Guards the cargo-area walls — peel-and-stick EVA foam panels protect the Bronco's rear side panels and tailgate from gear scuffs, scratches, and dings.
Cuts rattle and road noise — the foam dampens the hollow echo off the bare plastic cargo panels for a quieter ride.
Two colorways — choose Black with Grey Lines or Grey with Black Lines, both in a rugged topographical pattern.
Precision-cut for the 4-door — sections match the factory panels and clear the latches, cubbies, vents, and 12V/light cutouts.
Peel-and-stick install — adhesive-backed panels go on with basic surface prep. No tools, no drilling.
Cargo Area Foam Protector Kit — Ford Bronco 4-Door
Protect the rear cargo walls, kill the rattle, and finish the space — in your choice of two topo colorways.
Protection Where It Takes the Abuse
The Bronco's rear cargo walls are bare, hard plastic — exactly where coolers, gear boxes, tools, and dog claws leave scuffs and scratches. This kit lines those panels with a durable EVA foam layer that takes the hits so the factory plastic doesn't. Load and unload without babying the interior.
Quieter Back There, Too
Empty cargo panels echo. The foam layer dampens that hollow resonance and cuts down the rattle and road noise coming off the rear of the cabin — a subtle but real difference on long highway pulls and washboard trails.
Two Colorways, One Rugged Look
Pick the finish that matches your build: Black with Grey Lines for a stealthy, blacked-out cargo area, or Grey with Black Lines for a lighter, contrast look. Both carry the same topographical (topo) line pattern that plays off the Bronco's outdoorsy character and turns bare plastic into a finished, intentional-looking space.
Cut for the Factory Panels
Every section is precision-cut to the OEM 4-door cargo panels, with clean openings for the latches, storage cubbies, vents, and the 12V/light cutout. The panels follow the factory contours so the finished result looks molded-in — not like an afterthought stuck to the wall.
Watch the Install
Peel, Stick, Done
Clean and prep each cargo panel so the adhesive bonds fully.
Dry-fit each matching section to confirm orientation and cutouts.
Peel the backing, align to the panel edges, and press from the center out.
Work the pre-cut openings around the latches, cubbies, and 12V outlet.
No drilling, no special tools — just careful surface prep.
⚙️ Installation Tips
Peel-and-stick foam lives and dies on surface prep. Wipe each panel down with isopropyl alcohol and let it dry fully before applying — no waxes or protectants on the bonding area. Install in a warm space (roughly 65°F+) so the adhesive tacks, dry-fit before you peel, and press firmly across the whole panel. Watch the full install video above first.
FAQ
Will this fit my Bronco? It's cut for the 2021–2026 Ford Bronco 4-Door cargo area. Choose your colorway at checkout.
What's the difference between the two colors? Black w/Grey Lines is a blacked-out look; Grey w/Black Lines is lighter with contrast. Same topo pattern and foam on both.
How hard is the install? It's a DIY peel-and-stick job — no tools or drilling. Surface prep is the key step. See the video above.
Does it cover the cutouts and latches? Yes — the sections are pre-cut to clear the latches, storage cubbies, vents, and 12V/light openings.
