392 Engine Cover Overlay Decals - 2021-2024 Jeep Wrangler Unlimited Rubicon 392
Give the raised 392 lettering and stripe graphics on your Wrangler Unlimited Rubicon 392 engine covers a fresh color without painting or removing the covers. These Reflective Concepts precut vinyl decals are sized and designed to adhere to the top, flat surface of the raised 392 numbers and stripes on both engine covers - available in dozens of colors from reflective to metallic to gloss.
Before ordering, there are a few important things to know. The factory gold paint on the 392 covers is notoriously inconsistent and will show through around the outer edges of the decals since the vinyl lays on the flat top only and does not wrap the edges. Additionally, applying and then removing these decals can cause the factory gold paint to peel. If your gold paint is already peeling, it may continue to do so under the vinyl and cause bubbling. Clean covers with liquid dish soap and water prior to application - avoid solvents that could lift the gold finish.
Product Features
- Precut vinyl decals for the raised 392 letters and stripe graphics
- Fits both engine covers on the 2021-2024 Wrangler Unlimited Rubicon 392
- Kit includes: 2 x 392 decals + 2 x stripe decals (spare set for each)
- Vinyl adheres to the top flat surface only - does not wrap over edges
- Available in reflective, non-reflective, metallic, and textured finishes
- Sold as: 1 kit (covers both engine covers)
⚠️ Important Notes
The factory gold paint on the 392 engine covers is very inconsistent across vehicles and runs over the edges of each letter and stripe. Because the vinyl sits on the top flat surface only, the factory gold will show through around the outer edges - this is expected and not a defect.
If decals are applied and then removed, the factory gold paint underneath may also peel. If the gold is already peeling, it may continue under the vinyl and cause bubbles or rippling. Reflective Concepts is not responsible for any alteration of the engine cover (sanding, refinishing, or paint removal).
Some owners have reported being able to get covers replaced under warranty due to peeling paint. Applying decals may impact that option.
Fitment
Fits: 2021, 2022, 2023, 2024 Jeep Wrangler Unlimited Rubicon 392. Vinyl decals only - factory engine covers required.
FAQ
Will the gold factory paint show through?
Yes, around the outer edges. The vinyl adheres to the top flat surface of the raised graphics and does not wrap over the edges, so the factory gold finish will be visible around the perimeter of each decal. This is expected.
Can I remove the decals after applying them?
Removing the decals carries a real risk of pulling the factory gold paint up with them. Reflective Concepts strongly advises caution. If the gold paint is already peeling, we recommend against applying decals.
Do I need to remove the engine covers to install?
No. These are peel-and-stick decals that apply directly to the covers while installed on the vehicle. Clean with dish soap and water before applying.
What does the kit include?
Two 392 decals and two stripe decals - one spare of each - sized for both the left and right engine covers.
