Slim Track Dash Bracket Phone Mount — 2019+ RAM 1500, 2500 & 3500
The empty tray on top of your RAM dash is the perfect spot for your phone, tablet or radar detector. This all-metal bracket drops right in and gives you a clean, solid place to mount them.
Built to Match Your RAM Dash
RAM's center dash tray is a perfect spot for gear, but until now there was nothing good to mount in it. The Slim Track bracket is CNC-machined from 6061-T6 aluminum and designed from a laser scan of the dashboard, so it follows the contours of the tray. The hardcoat anodized finish blends in for an OEM look and feel.
It fits both the 2019+ RAM 1500 (excluding RAM Classic) and the 2019+ RAM 2500/3500.
|
 |
 |
No Drilling. Easy to Remove.
Many dash brackets need holes drilled into your dashboard. This one uses 3M tape and the mounting screw holes already built into the dash tray from the factory. That gives you a rock-solid hold on rough roads and trails, and it means the bracket can be removed years later without damaging your dash.
|
Verify Your Dash Style
This bracket is made for the RAM dash tray with the RAM lettering across the top and the 12V outlet at the right end of the tray. It does not fit the dash style marked with the red X in the guide below, and it does not fit the RAM Classic.
It works with 5", 8.4", 12" and 14.5" displays. With the 8" screen you get extra cubby space in the tray. With a larger 12"+ screen it is a tight fit in the tray.
Choose Your Setup
Every option includes the same RAM dash bracket and precision-fit arm rests. Pick your holder in the Configuration selector above.
20LITE Universal Phone Mount (Single or Dual)
Fits nearly all smartphones and cases, up to 3.7" wide and 0.6" thick. Clip-in grips with button channels hold the phone without sticking anything to it, and the 20 Series 20mm ball & socket lets you aim it exactly where you want it. Choose a single holder for one side of the dash or dual holders to run two phones.
|
 |
 |
MagSafe Phone Mount (Non-Charging)
A strong, non-marring magnetic hold for any MagSafe-compatible phone or case. Phone not magnetic? Stick on the included metal adapter ring for the same grip. Available as a single or dual setup.
|
MagSafe Charging Phone Mount
The same magnetic grip with MagSafe wireless charging built in, so your phone charges while it is mounted. Strong magnets auto-align the phone to the coil, and the adapter ring is included for non-magnetic phones.
|
 |
 |
25W Qi2.2 / MagSafe Charging & Cooling Mount
Up to 25W of fast wireless charging that works with MagSafe, Qi2 and Google Pixel (Pixelsnap) phones. A thermoelectric (TEC) ice cooler holds your phone at an optimal charging temperature so it doesn't overheat and slow down on hot days.
Use the included 12V car charger adapter for full charging speed, not a standard USB port.
|
Tablet Mount, or Phone + Tablet
A spring-loaded tablet holder that fits most tablets with 7" to 18.4" screens in portrait or landscape, with re-positionable support legs. Choose the Tablet Mount on its own, or the 20LITE Phone Mount + Tablet Mount to run a phone on one side and a tablet on the other.
|
 |
 |
Dash Bracket Only
The bare bracket with the Slim Track top plate, for when you already own 20 Series holders or want to build your own layout one piece at a time. No arms are included with this option.
|
Sized for RAM's Layout
RAM's dash calls for a 6" arm on the driver's side for the best device placement. When a passenger-side mount is selected, a slightly longer 7" arm is used to clear the 12V power outlet in the tray and still mount at the end of the track with plenty of clearance over the dash. All configurations include precision-fit arm rests. Choose aluminum or carbon fiber tube arms in the Arm Type selector.
Slim Track: Slide, Swap, Done
Grid-style mounts are a pain to install and move. The Slim Track top plate has an integrated track, so you can add, remove or reposition a mount in seconds with just an Allen wrench and no fumbling with nuts. The plate holds up to four devices and takes the 20 Series 20mm ball & socket system, so you can add more holders later.
|
 |
Accent Kits — Make It Yours
Every holder comes standard with black knobs. Choose a color in the Accent Kit Color selector and you get a colored set of billet aluminum hardware to swap in for the black knobs — Blue, Green, Orange, Pink, Purple, Red, or Yellow.
How to Install an Accent Kit
Installation
🔧 Installs in Minutes — No Drilling
The bracket attaches with 3M tape and the factory screw holes already in the dash tray. Mount the bracket, then attach your holders. Charging holders plug into your 12V outlet with the included cable and adapter.
Adding More Holders Later
Specifications
| Fits |
2019+ RAM 1500 (excluding RAM Classic) and 2019+ RAM 2500/3500 |
| Displays |
5", 8.4", 12" and 14.5" factory screens |
| Material |
6061-T6 aluminum, CNC machined, black hardcoat anodized |
| Bracket size |
163 mm x 65 mm, 43 mm tall (about 0.8 lb) |
| Top plate |
Slim Track, holds up to 4 devices, 20 Series 20mm ball & socket compatible |
| Install |
3M tape plus factory dash screw holes. No drilling. |
| Arms |
Aluminum tube or carbon fiber tube, 6" driver side and 7" passenger side, arm rests included |
| Accent colors |
Black (standard), Blue, Green, Orange, Pink, Purple, Red, Yellow |
Complete the Build
Fitment note: This bracket is for the 2019+ RAM 1500 (excluding RAM Classic) and the 2019+ RAM 2500/3500 with the dash tray shown in the fitment guide above. It does not fit the RAM Classic or the dash style marked with the red X. Charging holders need the included USB cable and 12V car charger to work at full power. Colored accent kits swap in for the black knobs on the arms. The lifestyle photos show example setups and may not match the exact configuration you select.
FAQ
Will it fit my RAM?
It fits the 2019+ RAM 1500 (excluding RAM Classic) and the 2019+ RAM 2500/3500 with the dash tray shown with the green check. Check the Verify Your Dash Style guide above. |
Do I have to drill my dash?
No. It uses 3M tape and the factory screw holes in the dash tray, and it can be removed later without damaging the dash. |
Does it work with a large screen?
Yes. It is made for 5", 8.4", 12" and 14.5" displays. With a 12"+ screen the bracket is a tight fit in the tray. |
Which setup should I pick?
Pick Dash Bracket Only if you already own 20 Series holders. Pick 20LITE for a universal holder, MagSafe for a magnetic holder, a charging option to charge while you drive, or the tablet options for a tablet. Dual setups run a holder on each side. |
Aluminum or carbon fiber arms?
Both come in the same RAM-specific lengths. Aluminum is the standard black look; carbon fiber gives a woven carbon finish. Pick in the Arm Type selector. |
My phone isn't MagSafe. Will the magnetic mounts work?
Yes. The MagSafe mounts include a metal adapter ring you stick to your phone or case. |
Do the charging holders come with a charger?
Yes. They include a USB cable and a 12V car charger adapter. Use the 12V adapter for full charging speed. |
Can I add more holders later?
Yes. The Slim Track plate holds up to four devices and takes the 20 Series 20mm ball & socket system, so you can add or swap holders at any time. |
Where does a charging holder get power?
Charging holders plug into a 12V outlet with the included cable and car charger adapter. Use the 12V adapter for full charging speed. |
Can I remove it later?
Yes. Because it uses factory screw holes and 3M tape with no drilling, it can be removed without damaging the dash. |
What is the return policy?
All orders are covered by our 30-day return policy. |
