LINK Vent Mount Phone Holder — 2021+ F-150, Raptor, Lightning & 2023+ Super Duty
The most rugged all-metal vent-mounted phone holder setup for your Ford. Check the compatibility list below, pick your holder, and you're done.
This Part Fits
Compatibility matters on this one. Check your year, model and trim code below.
| Ford F-150 |
2021-2023 (all trim levels)
2024+ (XL, STX, XLT, Tremor [401A & 401B only], Tremor High [402A only], Lariat [501A only], Lariat High [502A only], King Ranch) |
| Ford F-150 Raptor |
2024+ (all trim levels) |
| Ford F-150 Lightning |
2022-2023 (Pro & XLT only)
2024-2025 (XLT only) |
| Ford Super Duty |
2023+ (all trim levels) |
Mounts to the Bezel, Not the Blades
Most vent mounts clip onto flimsy vent blades. The LINK bracket secures to the outer vent bezel instead, a much stronger surface that can take repeated flex and use. It doesn't block the vent, and the blades stay adjustable for full airflow.
Every bracket has a custom laser-fit rubber pad shaped to your vent bezel, which stops slipping and protects the vent from scratches and marring.
|
 |
 |
Built to Match Your Vent
Each bracket is CNC-machined from high-grade 6061-T6 aluminum and designed from a laser scan of the vent, so it follows the contours of the bezel. The hardcoat anodized finish gives an OEM look and feel that blends into the interior.
|
Choose Your Arm Length
The arm length sets how far the holder sits from the vent. Pick it in the Arm Length selector above.
-
3.5" Arm (BlueCruise Compatible): choose this if your truck has BlueCruise, so the holder stays clear of the driver monitoring camera.
-
2" Arm (Not BlueCruise Compatible): a shorter, tighter fit for trucks without BlueCruise.
-
Short Reach (Not BlueCruise Compatible): the closest-to-the-vent option, available on the MagSafe charging, Qi charging and magnetic holders.
Choose Your Setup
Every option uses the same F-150 / Super Duty vent bracket. Pick your holder in the Configuration selector above.
20LITE Universal Phone Holder
Fits any device, with or without a case, up to 3.7" wide and 0.6" thick. The replaceable, injection-molded octagon-shaped grips pull the phone away from the back of the cradle to minimize heat transfer on hot days and clip into the housing without any tape. The spring is calibrated for vehicles so you can put a phone in and take it out with one hand without straining the mount.
|
 |
 |
MagSafe Phone Holder (Non-Charging)
A secure magnetic hold for any MagSafe-compatible phone or case. If your phone isn't magnetic, stick on the included metal ring for the same grip. This holder does not charge the phone.
|
MagSafe Charging Phone Holder
The same magnetic grip with wireless charging built in, so your phone charges while it is mounted. Non-magnetic phones get the same hold and charging with the included metal ring.
|
 |
 |
25W Qi2.2 / MagSafe Charging & Cooling Holder
Up to 25W of fast wireless charging for MagSafe, Qi2 and Google Pixel (Pixelsnap) phones. A thermoelectric (TEC) ice cooler keeps your phone at an optimal charging temperature so it doesn't overheat and slow down during heavy use.
Use the included 12V car charger for full charging speed.
|
Qi Wireless Charging Phone Holder
A spring-loaded cradle with Qi wireless charging built in. Drop your Qi-compatible phone in and it charges while it is mounted.
|
 |
 |
Magnetic Phone Holder
A simple magnetic holder that grips with a plate attached to your phone or case. It's a good choice if you want a quick-release, low-profile setup.
|
Quad Lock MAG Phone Holder (Standard or Wireless Charging)
Made for Quad Lock MAG cases and adapters. Choose the MAG Head for a standard magnetic hold or the MAG Wireless Charging Head to charge while you drive. Use the Configuration selector to pick the one you want.
|
 |
 |
Dual-T / Cobb Accessport Tuner Holder
Made for the Cobb Accessport and most monitors and tuners that use the 2-prong (Dual-T) mounting system, so your gauges and tune stay right in your line of sight.
|
Vent Mount Bracket Only
The bare F-150 / Super Duty vent bracket with 20mm and 17mm metal balls, for when you already own a 20 Series holder or want to use your own.
|
 |
Accent Kits — Make It Yours
Every holder comes standard in black. Choose a color in the Accent Kit Color selector to get billet aluminum accent hardware in Blue, Green, Orange, Pink, Purple, Red, or Yellow.
How to Install an Accent Kit
Easy Install
Clear step-by-step instructions and all necessary hardware are included, so you'll be up and running in minutes.
Specifications
| Fits |
2021+ Ford F-150, F-150 Raptor, F-150 Lightning (select trims) and 2023+ Super Duty. See the compatibility list above. |
| Material |
6061-T6 aluminum, CNC machined, hardcoat anodized |
| Mounting |
Outer vent bezel with a laser-fit rubber pad. Vent blades stay adjustable. |
| Connection |
20 Series 20mm ball & socket (bracket also includes a 17mm ball) |
| Arm lengths |
3.5" (BlueCruise compatible), 2", short reach (select holders) |
| Holders |
20LITE universal, MagSafe, MagSafe charging, Qi2.2 25W charging & cooling, Qi charging, magnetic, Quad Lock MAG, Quad Lock MAG wireless charging, Dual-T / Cobb tuner |
| Accent colors |
Black (standard), Blue, Green, Orange, Pink, Purple, Red, Yellow |
Complete the Build
Fitment note: Not every 2024+ F-150 trim is supported. For the Tremor, Tremor High, Lariat and Lariat High, only the trim codes listed above fit, and the Lightning is limited to the trims listed. If you aren't sure of your trim code, email info@stickerfab.com with your year, model and trim and we'll confirm before you order. The lifestyle photos show example setups and may not match the exact configuration you select.
FAQ
|
Will it fit my truck?
It fits the 2021+ F-150 (select trims (select trims), F-150 Raptor, F-150 Lightning (select trims) and 2023+ Super Duty. Check the "This Part Fits" box for the exact years and trim codes.
|
Do I need BlueCruise-compatible arms?
If your truck has BlueCruise, choose the 3.5" arm. The 2" and short-reach arms are not BlueCruise compatible.
|
|
Does it block my vent or damage it?
No. It mounts to the outer vent bezel instead of the blades, so airflow stays adjustable, and a custom laser-fit rubber pad protects the vent from scratches.
|
Which setup should I pick?
Pick 20LITE for a universal holder, MagSafe or Magnetic for a magnetic hold, a charging option to charge while you drive, Quad Lock MAG for Quad Lock cases, or the Dual-T mount for a Cobb Accessport or similar tuner.
|
|
My phone isn't MagSafe. Will the MagSafe holders work?
Yes. They include a metal ring you stick to your phone or case.
|
Do the charging holders come with a charger?
Yes. They include a cable and a car charger adapter. Use the 12V adapter for full charging speed.
|
|
Can I add more holders later?
Yes. The bracket uses the 20 Series 20mm ball & socket system, so you can swap or add 20 Series holders.
|
What is the return policy?
All orders are covered by our 30-day return policy.
|
