These flags look great in the rear windows of the Toyota 4Runner. It's a theme tons of off-roaders have embraced as we set off across the country, enjoying, roads, ruts, trails, beaches, and more.
The rear windows on the 2025 4Runner are pretty big. These take around 30 minutes to make!
NOTE: This comes as a left and right pair. See photos for fitment. The lines are separate pieces of vinyl and install after the main part is installed.
This installs in a similar manner as our fully printed overlays. We will be doing a wet install, however some dry install information is below. Recommended install temperature is over 70 degrees.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Wash the vehicle or clean the glass and surrounding trim.
3 item kit (microfiber, installation fluid, squeegee)
This is a vehicle specific video (above). For this, you would use our StickerFab application fluid or a few drops of dish soap mixed with a cup of water. Test you mixture and add more dish soap if needed.
This method is especially difficult with the curved glass on the 2025 4Runner. Try at your own risk! You can do a dry install by using painter's tape and a razor or scissors. See the video below of a similar dry install. Make sure you trim the transfer paper and backing paper along the outer edge prior to installing it this way.
