High Mount Brake Light Overlay
Ready to help us customize some more logo designs? We are transitioning into our own designs for certain overlays and this is one of them.
Currently starting with some customer requested options like:
- US Army
- This is the Way - Perhaps a familiar saying you've heard of before?
- FL6G - Florida 6G Broncos
Sold as a pair. One for install and one for backup in case you install the first one incorrectly. Includes alcohol prep pad.
Clean the application area to prepare it for installation. As with all of our overlays, we recommend installation ONLY in 75-85 degree WEATHER. Not a temporarily warm place.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
Items you may need:
- Detailing Spray
- Soapy Water
Use the transfer paper to install this overlay on your Ford Bronco. Before removing it, push down firmly, especially on the flat portions of the brake light. Use your fingernail to push down the vinyl close to the textured portion as well. Outline it with your fingernail.
Slowly remove the transfer paper making sure that the vinyl does not come up with the transfer paper. If it starts to come of, press it down and slowly continue. Covering up the vinyl with the transfer paper and pressing it down hard is okay as well. Continue until the transfer paper is completely removed.
Pay extra attention to any small pieces within letters.
I followed the instructions on the website and it went on with minimal issues. The very small individual pieces tend to want to stay on the paper. I used a pair of needle nose tweezers to start those, and the rest was easy. It’s been on for about a week and through a car wash with no signs of peeling.
Didn't realize it would totally block light out. Thought it would be like the other items bought. Tinted but transparent. Fits well like everything else.
The decal turned out just great, had to use the spare. But it turned out pretty good. Would recommend to all to get these decals. Easy to apply
I watched the installation video beforehand and it was helpful. I would actually trim around the outside of the black portion to make it easier to line it up on the brake light better because it is very hard to line up with the paper covering up the outer edge of the brake light while you are trying to line it up. Looks amazing when finished though. Would definitely buy it again!
This is a great product and simple to install.