StickerFab

Ford Bronco Rear Oval Emblem Overlay (Tint or Solid) - 2021-2023 Bronco / Bronco Sport

  • Sale
  • Regular price 38.00 SR




Ford Bronco Oval Emblem Overlay (Tint / Solid)

Here's our new way of slightly modifying the OEM oval emblem on the back of the Ford Bronco.  This tint goes over the stock emblem and knocks out some of the chrome to make it all more subtle.  

Choose from a variety of finishes to create your desired look.  Installs just like our other overlays.

Sold as a PAIR.  One product with backup.

NOTE:  This only goes OVER your OEM emblem.  You must have an OEM emblem in good condition to install this.  Smoked options are TINT.  Solid options are Black (Gloss) and Black (Matte).

AVAILABLE MATERIALS

  1. Dark Smoke -  Standard dark smoke material.  Made in Germany.
  2. Dark Smoke LX+ - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.
  3. Light Smoke - Standard light smoke material.  Made in Germany.
  4. Dark Smoke Stealth - Premium dark smoke matte (stealth) material with air egress channels for ease of installation (helps prevents bubbles).  Made in the USA.
  5. Dark Smoke Honeycomb - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.
  6. Dark Smoke Carbon Fiber - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  Modified light pattern when lit.  Made in the USA.
  7. Dark Smoke Galaxy - Premium dark smoke material with air egress channels for ease of installation (helps prevents bubbles).  A galaxy full of metallic flake in the light.  Appears similar to standard dark smoke when backlit.  Made in the USA.
  8. Red - Standard red material.  Made in Germany.
  9. Yellow - Standard yellow material.  Made in Germany.
  10. Black (Gloss) - Solid gloss black.  You can see the indentation of the stock Ford logo, however no light is allowed to pass through.
  11. Black (Matte) - Solid matte black.  You can see the indentation of the stock Ford logo, however no light is allowed to pass through.

Instructions

Items you may want to have:

  • Detail Spray (without wax)
  • Microfiber Towel or Paper Towel
  • StickerFab Application Fluid or dish with soapy water (drop of dish soap + 1-2 cups of water)
  • Heat gun or hair dryer
  •  

    Clean the application area to prepare it for installation.  Do not use a spray with any type of wax in it.

     

    A wet installation is recommended.  Use our application fluid or slightly soapy water on the back of the vinyl.  This will allow you to move the vinyl around and find the correct alignment.  Once aligned, use your fingers to push out the water/air.  Use light heat as needed to make sure that the overlay does not crease and adheres properly to the OEM emblem.

    Customer Reviews

    Based on 24 reviews
    79%
    (19)
    21%
    (5)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    S
    Steph Wong (Bergenfield, NJ, US)

    Ford Bronco Rear Oval Emblem Overlay (Tint or Solid) - 2021-2023 Bronco / Bronco Sport

    M
    Morgan (Missoula, MT, US)
    Looks good!

    I love that they sent two in case I messed up the first one. Looks really good and easy to apply

    M
    Michael Yakubics (Parma Heights, OH, US)
    Ford oval tinted overlay

    Takes a little work to get it right
    But looks great

    A
    Aaamay (Mooresville, NC, US)
    Rear Oval Overlay

    Wasn't horrible, wasn't great. I ordered based on the many reviews and word of mouth. The back overlay was MUCH better than the grab handle overlays I received that were worthless. I know they say they're cut to fit, etc but to have almost 1/2" overlap on one side made me throw them away.

    J
    John Ferris (Atlanta, GA, US)
    Could be better

    Could be better

    L
    Luke Dean (Greensburg, PA, US)

    Fits nicely

    W
    WILLIAM JAMES (North Olmsted, OH, US)

    Ford Bronco Rear Oval Emblem Overlay (Tint or Solid) - 2021-2023 Bronco / Bronco Sport

    j
    juan sanchez (Los Angeles, CA, US)
    works well, but takes patience

    product works well but takes patience to install correctly. Spent a bit of time with a blow dryer to get it to "shrink" around the curves of the emblem.