KC HiLITES SlimLite 6" LED Cover Topographic Vinyl Overlays
A contour-line topo background with the KC logo on top — printed vinyl cut for the KC SlimLite 6" cover.
Pick your size — this is the 6" topo listing.
KC makes the SlimLite cover in three sizes, and each overlay is cut for one size only. Match the part number printed on your KC cover (or your light's size) to the row below, then pick solid or topo. A 6" overlay will not fit an 8" cover, and a 4" overlay will not fit a 6" cover.
Note on photos: apart from the main image, some photos on this listing come from similar models or other SlimLite sizes. They show the designs and how they look installed — the size you receive is always the 6" cut for KC part #5109.
Topographic Overlays for Your KC SlimLite 6"
KC publishes a PDF for making custom light covers, but not everyone has the time or the equipment to make them. We print and cut the overlays for you. These topo overlays pair the KC logo with contour lines for a look that fits trail rigs, overland builds and off-road lighting.
This listing is the original 6" size (KC cover part #5109). Each order is a 2-piece set of printed vinyl overlays; the KC cover itself is sold separately.
4 Topo Designs
White KC lettering over Carbonized Gray or Code Orange topo lines, a Tuscadero Pink KC with Carbonized Gray lines, or black lettering with Badlands lines on a gray background.
Customer photo — may show a different SlimLite size.
Design Gallery
White KC with Carbonized Gray Topo
White KC with Race Red Topo
Tuscadero Pink KC with Carbonized Gray Topo
Black KC, Badlands Lines, Gray Background
Install: Wet Method
We recommend a wet install. This video shows a similar light-cover overlay install, and the same steps apply to your 6" KC SlimLite cover.
Clean the cover with a wax-free quick detailer and microfiber.
Spray the cover and the sticky side of the overlay with application fluid (or soapy water).
Float the overlay into position and align it.
Squeegee out the fluid and bubbles from the center out.
Use heat and your fingers to settle the curved areas.
Installation Tips
Ideal install temperature is 75-85°F. If it is hot out, install in the shade; if it is cool, warm the cover and overlay slightly. Clean the cover, spray both surfaces with StickerFab Application Fluid or soapy water (1 drop of dish soap per cup of water), align, then squeegee out the fluid.
KC HiLiTES SlimLite 6" LED light cover (KC cover part #5109)
Size
6" — original SlimLite size
Style
Topographic line printed vinyl
Designs
White with Carbonized Gray Topo, White with Code Orange Topo, Tuscadero Pink with Carbonized Gray Topo, Black Letters / Badlands Lines / Gray Background
Quantity
2-piece set
Made in
USA
What's Included
One 2-piece set of printed vinyl overlays cut for the KC SlimLite 6" cover.
Not Included
The KC SlimLite light cover (KC part #5109) and the light itself are sold separately — these are vinyl overlays only.
FAQ
Which size do I need? Match the size of your KC SlimLite light: 4" (cover part #5213), 6" (part #5109) or 8" (part #5206). Use the size table at the top of this page to jump to the right listing.
Is the KC cover included? No. These are vinyl overlays only. You need the KC cover for your light, sold separately.
What is the difference between solid and topo? Solid overlays are one flat design (color, outline, camo or carbon fiber look). Topo overlays add contour lines behind the KC logo. Both are cut for the same 6" cover.
Can I get a color that is not listed? Often, yes. Send us a note through the contact form with the color you have in mind.
How do I install them? Use the wet method shown in the video above: clean, spray with application fluid, align, squeegee, then heat the curved areas.
Do the photos show my exact size? Not always. Apart from the main image, some photos come from similar models or other SlimLite sizes. The overlay you receive is cut for the 6" cover (KC part #5109).
Will this work on other KC lights? These are cut specifically for the KC SlimLite 6" cover. Other KC lines such as Flex Era or Gravity use different covers.
Where is it made? StickerFab prints and cuts every overlay in the USA.
Notice of Non-Affiliation and Disclaimer: StickerFab is not affiliated, associated, authorized, endorsed by, or in any way officially connected with KC HiLiTES or any of its subsidiaries or affiliates. The name KC as well as related names, marks, emblems and images are registered trademarks of their respective owners, including KC HiLiTES Inc.
It took a while to put on the light covers because of the curvature in the plastic. But it’s such high-quality vinyl that you can peel and repeat to get all the bubbles out. Turned out amazing. Highly recommend.
{"id":47112887763263,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HG300","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Heat Gun for Vinyl Application (300W)","public_title":null,"options":["Default Title"],"price":6100,"weight":255,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}
