GP Factor V2 Folding Tailgate Table for the INEOS Grenadier
A stainless prep table, a camp kitchen counter and a tool tray that folds flat against the rear door when you're done. Pick the flat back or add the built-in storage cubby.
A Work Surface Where the Grenadier Needs One
The Grenadier's rear door is made for this. The table swaps in for the factory plastic panel and folds down to a 24" x 14" food-grade stainless surface with a bamboo cutting board that slides out to either side.
Use it for camp meals, a stove, a cooler lid, a tool tray while you air down, or a place to set things while you load gear. When you're done, it folds back flat against the door.
|
 |
Pick Your Back Panel
The table, hinge, latch and cutting board are the same on both. The difference is the back panel.
| |
Flat Backer |
Cubby (Extended Storage) |
| Back panel |
Solid flat aluminum panel |
Aluminum panel with a built-in storage cubby |
| Storage |
— |
About 650 cubic inches; the folded table acts as the cubby door |
| MOLLE cutouts |
— |
Top and side, for pouches or bungee cord |
| Light mount |
— |
Mounting location for a National Luna light or any ~10" wide LED panel (light not included) |
| Weight |
About 21 lbs |
About 22 lbs |
Choose your version with the Back Panel option above.
 |
Cubby Version: Storage You Can Actually Use
The cubby is built into the back panel and is much roomier than the factory plastic cubby. It holds about 650 cubic inches of tools, cooking supplies and vehicle gear.
-
The folded table is the cubby door, which is what lets the pocket extend out and be useful
-
Top and side MOLLE cutouts for attaching pouches or bungee cord
-
Light mounting location for a National Luna light or any ~10" wide LED panel (sold separately)
|
V2: Quieter, Cleaner, Easier to Use
The V2 keeps everything owners liked about the original and adds an integrated bumper system that locks the table and cutting board in place when stowed, so nothing slides or rattles on the trail.
The cutting board was reshaped with a more ergonomic edge that's easier to pull and push. The new design also keeps the table surface solid with no holes, so it's easier to clean and more practical to use.
|
 |
 |
Stainless Table, Bamboo Cutting Board
The table surface is 304 #4 food-grade stainless steel. The cutting board is a CNC-cut 24" x 14" bamboo board that stores below the table surface, slides out to the left or right to extend your counter, and lifts out for cleaning or use off the truck.
It's bamboo, so treat it like any wood board. Wipe it with a little food-safe cutting board oil now and then, especially in dry climates, to keep it from drying out and sliding smoothly.
|
One-Handed Latch, Cable-Free Hinge
A reinforced stainless hinge replaces the stretched cables you find on most fold-down tables, so there's nothing in the way when you're working. A two-stage micro rotary latch lets you release and close the table with one hand.
The hinge nut is 4140 steel with a black nitride finish, and the rest of the hardware is stainless steel for corrosion resistance.
|
 |
Installation: No Modification, About 15 Minutes
- Open the rear door and remove the factory plastic panel.
- Line the table's back panel up with the existing rivnut locations on the door.
- Bolt it in with the factory hardware or the stainless hardware that comes with the table.
No drilling, cutting or permanent changes. It's a one-person job and most installs take under 15 minutes.
Specifications |
| Table surface |
304 #4 food-grade stainless steel, 24" x 14" |
| Cutting board |
CNC-cut bamboo, 24" x 14", slides out left or right |
| Back panel |
Aluminum with a textured powder coat finish |
| Hinges |
304 stainless steel, cable-free design |
| Hinge nut |
4140 steel with black nitride finish |
| Hardware |
Stainless steel |
| Weight capacity |
55 lbs |
| Weight |
About 21 lbs (Flat Backer) / about 22 lbs (Cubby) |
| Cubby capacity |
About 650 cubic inches (Cubby version only) |
| Origin |
Made in the USA |
This Part Fits
| Vehicle |
Years |
Notes |
| INEOS Grenadier |
2024+ |
Rear door; replaces the factory plastic panel and mounts to the factory rivnut locations |
Not sure it's right for your truck? Email info@stickerfab.com with your year and model and we'll confirm before you order.
💡 Care Tip
Keep the bamboo board happy with a coat of food-safe cutting board oil or wax every so often. Line the board up in the middle before you close the table. If the board ever feels stiff, a fresh coat of oil usually gets it sliding again.
Complete the Build
FAQ
What is the difference between the Flat Backer and the Cubby?
Only the back panel. The Cubby adds a built-in storage pocket of about 650 cubic inches with MOLLE cutouts and a light mounting location. The table, hinge, latch and cutting board are identical. |
Do I have to modify my Grenadier?
No. It bolts to the existing rivnut locations on the rear door using the factory hardware or the stainless hardware provided. There is no drilling or cutting. |
How long does it take to install?
Most owners finish in about 15 minutes. Remove the factory plastic panel, then bolt the table into the same locations. |
How much weight can the table hold?
The table is rated for 55 lbs, which covers a camp stove, cooler lid, cookware and tools. |
Will it rattle while I drive?
The V2 adds an integrated bumper that locks the table and cutting board in place when stowed to eliminate movement and rattle. |
How do I take care of the bamboo cutting board?
Treat it with food-safe cutting board oil or wax every so often, especially in dry climates. Center the board before you close the table. |
Are the lights shown in the photos included?
No. The Cubby has a mounting location for a National Luna light or any ~10" wide LED panel, but lights are sold separately. |
Where is it made?
Both versions are made in the USA. |
