A fully closed cold air intake that adds 15+ whp and intoxicating turbo sound to your Bronco — without sacrificing filtration or heat isolation.
Oversized Cone Filter + Redesigned Lid
It starts with an oversized inverted cone filter — available oiled or dry — with 50% more airflow potential than the factory filter and a built-in velocity stack. Either filter can support maximum power.
We completely redesigned the intake lid to fit the larger filter and remove the choke points in the factory lid. Together the filter and lid deliver big power gains and reduce turbo lag while keeping factory-like heat isolation and filtration performance.
Closed Airbox, No Compromises
Unlike an open filter that gulps hot engine-bay air, the BMS intake stays fully enclosed. It retains the OEM cold-air ducting and water dump, feeds through dual air inlets, and isolates the filter from underhood heat — so you get the power and sound of an aftermarket intake with the intake temps and filtration of the factory system.
A clear window in the lid lets you inspect the filter at a glance, and the whole system installs in minutes.
Blue Oiled vs. Dry Extendable Filter
The oiled cotton filter is cleanable with an S&B kit every 15–20k miles and lasts the life of your Bronco — our pick for most drivers. The dry extendable filter offers superior filtration for frequent sandy/dusty off-roading and cleans up with compressed air.
Hear It for Yourself
The redesigned lid and oversized cone filter don't just add power — they transform the sound. More induction growl, more turbo spool, more character every time you get on the throttle. Watch the sound clip, then check the install time-lapse below.
Dyno Results — BMS Intake vs. Stock
BMS Bronco intake dyno results paired with a JB4 tuner.
The BMS intake looks great under the hood and holds up where you actually use your Bronco. The dual-inlet closed airbox keeps intake temps in check on the highway, while the filter options let you dial in exactly the filtration you need — everyday oiled performance or dry extreme-condition protection for the dusty stuff.
📦 What's Included & Fitment
In the box: (1) airbox lid with pre-installed clear window • (1) oversized BMS renewable performance filter or dry extendable filter (based on the option you select).
Fits: 2021+ Ford Bronco 2.3L EcoBoost 4-cyl. Turbo • 2021+ Ford Bronco 2.7L EcoBoost 6-cyl. Turbo. Installs in minutes with basic hand tools — download the install guide.
California note: This performance intake is not CARB-certified for emissions and cannot be shipped to California addresses. It is sold for use on vehicles operated outside of California.
FAQ
Oiled or dry filter — which should I pick? The blue oiled renewable filter is our recommendation for most drivers (clean every 15–20k miles with an S&B kit). Choose the dry extendable filter if you frequently off-road in very sandy or dusty environments.
Do I need a tune? No. The intake is a bolt-on that works with factory tuning. It also pairs perfectly with a JB4 tuner for additional gains (the dyno above was run with a JB4).
Will it fit both the 2.3L and 2.7L? Yes — this intake fits 2021+ Ford Bronco 2.3L and 2.7L EcoBoost engines.
How long does installation take? Just a few minutes with basic hand tools. Follow the linked install guide — no cutting or permanent modification required.
