KC HiLITES SlimLite 6" LED Cover Solid Color Vinyl Overlays
Custom-printed vinyl that turns a plain black KC SlimLite 6" cover into a design that matches your rig.
Pick your size — this is the 6" solid listing.
KC makes the SlimLite cover in three sizes, and each overlay is cut for one size only. Match the part number printed on your KC cover (or your light's size) to the row below, then pick solid or topo. A 6" overlay will not fit an 8" cover, and a 4" overlay will not fit a 6" cover.
Note on photos: apart from the main image, some photos on this listing come from similar models or other SlimLite sizes. They show the designs and how they look installed — the size you receive is always the 6" cut for KC part #5109.
Make a Plain Cover Look Like Yours
KC publishes a PDF for making custom light covers, but not everyone has the time or the equipment to make them. We print and cut the overlays for you — solid colors, outlines, camo, gradients and carbon fiber look — so your KC SlimLite 6" lights match your bumper, your pillar, or your whole build.
This listing is the original 6" size (KC cover part #5109). Each order is a 2-piece set of printed vinyl overlays; the KC cover itself is sold separately.
25 Designs to Choose From
Pick a bold solid color like Race Red, Velocity Blue or Eruption Green, go subtle with a tone-on-tone carbon fiber look, or run Urban Camo. We also offer outline styles including the “The Original” sunglasses logo.
Customer photos show other SlimLite sizes and designs — they are here to show the look, not to confirm your size.
Design Gallery
Retro Gradient 5
White Outline
Orange Urban Camo
Cactus Gray
Code Orange
Cool Urban Camo
Cyber Orange
Desert Sand
Earth
Eruption Green
Race Red
Solar Orange
Urban Green
Velocity Blue
Yellow
Carbon Fiber Look
Race Red Outline "The Original"
KC Yellow Outline "The Original"
Black KC on White Background
Carbonized Gray
Red with White Outline
Cool Gray
Purple
Install: Wet Method
We recommend a wet install. This video shows a similar light-cover overlay install, and the same steps apply to your 6" KC SlimLite cover.
Clean the cover with a wax-free quick detailer and microfiber.
Spray the cover and the sticky side of the overlay with application fluid (or soapy water).
Float the overlay into position and align it.
Squeegee out the fluid and bubbles from the center out.
Use heat and your fingers to settle the curved areas.
Installation Tips
Ideal install temperature is 75-85°F. If it is hot out, install in the shade; if it is cool, warm the cover and overlay slightly. Clean the cover, spray both surfaces with StickerFab Application Fluid or soapy water (1 drop of dish soap per cup of water), align, then squeegee out the fluid.
Retro Gradient 5, Carbon Fiber Look (Black Text), Orange Urban Camo, Cactus Gray, Carbonized Gray, Code Orange, Cool Gray, Cool Urban Camo, Cyber Orange, Desert Sand, Earth, Eruption Green, Purple, Race Red, Solar Orange, Urban Green, Velocity Blue, White Outline, Yellow, Race Red Outline "The Original", KC Yellow Outline "The Original", Black KC / White Background, 392 Gold, KC Yellow the Original with Cold Urban Camo, Red with White Outline
Quantity
2-piece set
Made in
USA
What's Included
One 2-piece set of printed vinyl overlays cut for the KC SlimLite 6" cover.
Not Included
The KC SlimLite light cover (KC part #5109) and the light itself are sold separately — these are vinyl overlays only.
FAQ
Which size do I need? Match the size of your KC SlimLite light: 4" (cover part #5213), 6" (part #5109) or 8" (part #5206). Use the size table at the top of this page to jump to the right listing.
Is the KC cover included? No. These are vinyl overlays only. You need the KC cover for your light, sold separately.
What is the difference between solid and topo? Solid overlays are one flat design (color, outline, camo or carbon fiber look). Topo overlays add contour lines behind the KC logo. Both are cut for the same 6" cover.
Can I get a color that is not listed? Often, yes. Send us a note through the contact form with the color you have in mind.
How do I install them? Use the wet method shown in the video above: clean, spray with application fluid, align, squeegee, then heat the curved areas.
Do the photos show my exact size? Not always. Apart from the main image, some photos come from similar models or other SlimLite sizes. The overlay you receive is cut for the 6" cover (KC part #5109).
Will this work on other KC lights? These are cut specifically for the KC SlimLite 6" cover. Other KC lines such as Flex Era or Gravity use different covers.
Where is it made? StickerFab prints and cuts every overlay in the USA.
Notice of Non-Affiliation and Disclaimer: StickerFab is not affiliated, associated, authorized, endorsed by, or in any way officially connected with KC HiLiTES or any of its subsidiaries or affiliates. The name KC as well as related names, marks, emblems and images are registered trademarks of their respective owners, including KC HiLiTES Inc.
Wrong stickers were shipped and when I asked them about it, the correct ones were packaged and shipped before I knew it. Product is great quality and looks fantastic. Would purchase again.
Nice! Looking good!
a
alejandro nava alcantar (Los Angeles, CA, US)
10/10 customer service
Good quality/ good customer service.
{"id":47112887763263,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"HG300","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Mini Heat Gun for Vinyl Application (300W)","public_title":null,"options":["Default Title"],"price":2400,"weight":255,"compare_at_price":null,"inventory_management":"shopify","barcode":null,"requires_selling_plan":false,"selling_plan_allocations":[],"quantity_rule":{"min":1,"max":null,"increment":1}}
