Grab Handle & Accessory Ready Phone Mount — 2021+ Ford Bronco
Put your phone where you can see it, using the mounting points your Bronco already has. Pick the holder, pick the arm length, and bolt it on.
Mount It Where You Need It
Hardware is included for installing on the factory Accessory Ready mounting points, the center console grab handle, or the driver or passenger side grab handle. Choose the spot that works best for your setup.
For the driver and passenger grab handles, we recommend the 3.5" arm for the best reach and positioning.
|
 |
Choose Your Holder
Pick your holder and arm length in the selectors above. Every option includes the Bronco mounting ball and hardware.
 |
20LITE Universal Phone Mount
Works with nearly any phone, with or without a case, up to 3.7" wide and 0.6" thick. The spring-loaded cradle has clip-in grips with button channels, and you can drop your phone in and take it out with one hand, in portrait or landscape.
|
MagSafe Phone Mount (Non-Charging)
Made for any MagSafe-compatible phone or MagSafe case, with a no-slip, non-marring magnetic hold from neodymium magnets behind a rubber pad. Don't have a MagSafe phone? A sleek adhesive metal ring is included so any phone gets the same magnetic hold. We recommend putting the ring directly on the phone, since it won't work through every case material. This holder does not charge your phone.
|
 |
 |
MagSafe Charging Phone Mount
The same secure magnetic hold with MagSafe wireless charging built in, up to 15W with auto-aligning magnets. A metal adhesive ring is included for phones that aren't MagSafe compatible, so you get the magnetic hold and the charging either way.
|
Qi2.2 / MagSafe Charging & Cooling Mount
Up to 25W of wireless power for MagSafe, Qi2, and Google Pixelsnap phones. A built-in TEC “ice” cooling module actively holds your phone at a safe charging temperature, so it doesn't overheat or slow down on hot days or long drives.
Use the included 12V car charger and USB cable for full speed. If your Bronco's dash USB isn't a 45W PD port, plug the cable into the 12V outlet with the included power adapter. Thick cases can reduce charging efficiency.
|
 |
Two Arm Lengths
Both arms are all-aluminum with dual omni-directional 20mm ball-and-socket joints, so you can find the exact angle you want.
 |
3.5" DuraLock Arm — Compact
The dual-socket design gives you the largest range of articulation for perfect positioning. The arm measures 3.5" end to end and 2.75" from ball center to ball center. It's the one to pick for the driver and passenger grab handles.
|
7.5"–9.25" Telescoping Arm — More Reach
An all-aluminum telescoping tube designed to minimize vibration. A twist-locking collar extends it from 7.5" to 9.25" so you can bring the phone closer to where you sit. It pairs well with the dash and center console Accessory Ready points.
|
 |
Installation
🔧 Installation — Bolts to Factory Points
Everything you need for each mounting spot is included in the box.
-
Center console grab handle: 20mm ball with an M6×60 screw and spacer. Works on Broncos with or without the factory grab handle.
-
Front dash Accessory Ready point: 20mm ball with a 1/4"-20 1-1/8" screw.
-
Driver and passenger grab handles: use the same ball and hardware.
Specifications
| Fits |
2021+ Ford Bronco and Bronco Raptor (6th generation) |
| Mounting points |
Front dash Accessory Ready, center console Accessory Ready / grab handle, driver and passenger grab handles |
| Material |
Black anodized aluminum, glass-filled resin knobs molded over stainless steel threaded inserts |
| Connections |
Dual-socket 20mm ball and socket, 20 Series compatible (not for 25.4mm / 1" B-size balls) |
| Arm length |
3.5" DuraLock arm (2.75" ball-center to ball-center) or 7.5"–9.25" telescoping arm |
| 20LITE holder |
Phones up to 3.7" wide and 0.6" thick |
| Charging holders |
MagSafe up to 15W; Qi2.2 up to 25W with cooling. Cable and 12V adapter included with the Qi2.2 holder. |
| Weight |
About 7.5 oz to 16 oz depending on holder and arm |
Complete the Build
FAQ
Where does it mount?
On the factory Accessory Ready points on the dash and center console, or on the center, driver, or passenger side grab handle. Hardware for each is included. |
Do I have to drill anything?
No. It bolts to the points your Bronco already has, so there is no drilling or adhesive. |
Which arm should I pick?
The 3.5" arm is best for the driver and passenger grab handles. The 7.5"–9.25" telescoping arm gives more reach from the dash and center console points. |
My phone isn't MagSafe. Will the magnetic holders work?
Yes. Both MagSafe holders include an adhesive metal ring. Put it directly on your phone for the best hold. |
Will the 20LITE fit my phone with a case?
It fits phones up to 3.7" wide and 0.6" thick, with or without a case. |
How do I power the Qi2.2 charging holder?
Use the included 12V car charger and USB cable. If your dash USB is not a 45W PD port, plug into the 12V outlet with the included adapter. A standard USB port will not give full power. |
Does it work with other 20mm mounts?
Yes. It's built on the 20 Series 20mm ball-and-socket system and works with other 20mm products. It is not for 25.4mm (1") B-size balls. |
What if I change my mind?
We offer 30-day returns on unused, uninstalled items in original packaging. Email info@stickerfab.com and we'll take care of you. |
