StickerFab Topo Side Window Panel Overlays — Defender 110 & 130
StickerFab's topographic side window panel overlays take the Defender's already distinctive profile and give it a layered, terrain-map aesthetic that's subtle at a glance and sharp up close. The topo line design was custom made by StickerFab and is printed and fulfilled from Fort Myers, FL — not a generic import.
Each set covers both the driver and passenger side window panels. The colored line options (Carbonized Gray, Desert Sand, White) let the Defender's factory paint show through the background — the topo lines are the only visible element. Clear Lines work best on lighter paint colors where the topo relief is visible. Every variant is protected with a UV-stable stealth overlaminate for long-term durability and a clean matte finish.
Fitment Options
-
2020-2024 — includes die-cut opening for the factory side emblem (Land Rover oval)
-
2025+ — no emblem cut-out; use provided photos to confirm panel orientation before installing. Lines must align correctly — test fit first.
Line Color Options
-
Clear Lines — topo lines are clear; factory paint shows through. Best on white, silver, silver, and other light colors.
-
Carbonized Gray Lines — dark gray topo lines, works well on lighter and mid-tone paint colors.
-
Desert Sand Lines — warm tan topo lines, pairs well with Defender earth tones (Pangea Green, Gondwana Stone, etc.).
-
White Lines — bright white topo lines, high contrast on dark paint (Santorini Black, Carpathian Grey, etc.).
Installation
Wet install — use StickerFab Application Fluid (included option) or 1 drop of dish soap per cup of water.
What you'll need:
- Clean the panel and surrounding area with a microfiber and wax-free detailer
- Wet the panel surface and the vinyl backing with application fluid
- Align the overlay — for 2020-2024, center the oval cut-out over the Land Rover emblem
- Squeegee from center outward to push fluid out from under the vinyl
- Allow to dry fully, then press down all edges and corners
- Use light heat to improve adhesion on edges and accelerate drying
2025+ note: No emblem cut-out is included. Use the product photos to confirm correct panel orientation before installing — the topo lines must align properly between driver and passenger sides.
Fitment
Fits: 2020+ Land Rover Defender 110 and Defender 130 (all trims). Select your year range at checkout — 2020-2024 has emblem cut-out; 2025+ does not.
FAQ
Does each set cover both sides of the Defender?
Yes — each kit includes overlays for both the driver and passenger side window panels.
How do I know if Clear Lines will be visible on my Defender?
Clear Lines work by allowing your factory paint to show through the background while the topo line relief creates a subtle texture effect. They're most visible on lighter colors (Fuji White, Indus Silver, Tasman Blue). On very dark colors like Santorini Black, the effect is minimal — choose White or Carbonized Gray for high contrast.
What's the difference between the 2020-2024 and 2025+ versions?
The 2020-2024 Defender has a Land Rover oval emblem on the side window panel — the overlay includes a die-cut opening for it. The 2025+ redesign moved or removed that emblem, so the overlay has no cut-out. Use the product photos to confirm panel orientation before installing.
Is this a permanent modification?
No — the overlay can be removed with mild heat without damaging the factory paint or panel. Clean removal with a heat gun and slow, even pulling.
Where is this made?
Designed and printed by StickerFab in Fort Myers, FL. Made to order.
