Don't hide your Toyota pride. Add some topographic map styling and make the front logo a little less subtle and a lot neater. Easy to apply. Matte finish.
Recommended Items:
2 item kit (microfiber, installation fluid)
Ideal install temperature is 75-85 degrees. If it is warm, do the install in the shade. Vice versa if it is cooler. Clean the surface of the factory letters.
First remove the protective paper from the top of the acrylic pieces. There is a protective 3M adhesive paper on the bottom side that will be removed later.
Spray the surface again with StickerFab application fluid and do the same to the overlay as you peel it off the backing paper. This fluid will let you align the material perfectly and prevent it from sticking to itself. Once you get a proper alignment, you can squeegee out the fluid and bubbles.
Test fit each letter and then remove the backing paper. Re-align the piece on top of the OEM letter and make sure there is an even gap around the outer edge. The acrylic pieces are larger than the OEM emblem to cover up the silver. Once properly aligned, press down firmly. Repeat until all of the letters are complete.
Notice of Non-Affiliation and Disclaimer:
StickerFab is not affiliated, associated, authorized, endorsed by, or in any way officially connected with Toyota, or any of its subsidiaries or its affiliates.
The name Prado as well as related names, marks, emblems and images are registered trademarks of their respective owners, including Toyota.
I got my front grille emblem kit and it took about 10 minutes to put it on my Land Cruiser. The extra set of vinyl that comes with it is great if you have shaky hands like me. I am super happy with the product!!
