Version 1L Tail Light Overlays — 2021+ Ford Bronco (LED Taillights)
The Version 1L covers the turn signal portion of the LED tail lights on the 2021+ Ford Bronco, giving the tails a smoked, tinted, or patterned appearance with or without the lights on. This was a user-submitted design that quickly became one of our most popular Bronco overlays — we think it was done right the first time. Sold as a left/right pair, precision cut for the Bronco's LED tail light configuration.
Important: These overlays are designed for the LED taillights only. They are not compatible with the halogen tail light version. Check your Bronco's tail light type before ordering.
Material Options
Dark Smoke — standard dark smoke tint. Clean, classic smoked look. Made in Germany.
Dark Smoke LX+ — premium dark smoke with air-egress channels (helps eliminate bubbles during install). Made in the USA.
Light Smoke — lighter tint for a subtle tone-down without going full dark. Made in Germany.
Light Smoke LX+ — premium light smoke with air-egress channels. Made in the USA.
Dark Smoke Stealth — premium dark smoke in a matte finish with air-egress channels. Eliminates the gloss look entirely. Made in the USA.
Light Smoke Stealth — premium light smoke in a matte finish with air-egress channels. Made in the USA.
Dark Smoke Honeycomb — dark smoke with a honeycomb pattern visible when the lights are on. Air-egress channels. Made in the USA.
Dark Smoke Carbon Fiber — dark smoke with carbon fiber texture visible when lit. Air-egress channels. Made in the USA.
Dark Smoke Galaxy — dark smoke loaded with metallic flake that catches light when illuminated. Appears similar to standard dark smoke when backlit from behind. Air-egress channels. Made in the USA.
LX+ and air-egress channel materials have micro-channels cut into the adhesive side that allow air to escape during installation — significantly easier to apply without bubbles, especially on the first attempt.
Installation
Orientation tip: You can tell driver from passenger side by the angled design on the bottom of each overlay.
What you'll need:
Wax-free detailer spray or glass cleaner + microfiber towel
Clean the tail light surface thoroughly — no wax-based products. Wet install is recommended: spray the adhesive side of the vinyl with application fluid or soapy water, position the overlay on the tail light, slide into alignment, then squeegee from center outward to push out the fluid. Allow to dry fully before driving.
Fitment
Fits: 2021+ Ford Bronco — LED taillights only (all trims with factory LED tails). Does not fit halogen taillights.
FAQ
How do I know if my Bronco has LED or halogen taillights? LED taillights have a distinct segmented LED light bar design. Halogen tails have a conventional round/oval bulb visible through the lens. If you're unsure, check your Bronco's window sticker or compare to product photos.
Will the overlay affect brake light brightness? Dark Smoke will reduce apparent brightness somewhat — this is expected and common with any smoked tail light treatment. Light Smoke has minimal impact. These overlays comply with general use; always ensure your lights remain visible to other drivers.
What's the difference between Dark Smoke and Dark Smoke Stealth? Dark Smoke has a gloss finish; Dark Smoke Stealth has a matte finish. If you're running a flat or satin exterior, Stealth blends in better. Both are the same level of tint darkness.
Do the patterned options (Honeycomb, Carbon Fiber, Galaxy) look good when the lights are off? When the lights are off, all three appear as a standard dark smoke tint — the pattern becomes visible when the LEDs illuminate from behind. Galaxy is the exception; it retains a subtle metallic sheen even when unlit.
Are these easy to remove? Yes — apply mild heat and peel slowly. No adhesive residue remains on clean, properly prepared surfaces.
Version 1L Tail Light Overlays - 2021+ Bronco (w/ LED Taillights)
J
Jason Snyder (Midland, GA, US)
2023 Bronco Cursive Script Metal Emblems and Light Overlays
I ordered Corncob Large Overlay letters, Bar overlays (front head lights), Version 1 tail light overlays, and Bronco cursive script metal emblems for my new 2023 Bronco. Could not be happier with the quality of the products by StickerFab or the way my Bronco looks. Big thanks to Jami and the Customer Support Team for helping me out after I jack legged putting on the emblems. They got me a new set in a few days! If you are looking to enhance the look of your Bronco then check out the products on StickerFab!
K
Kurt Dieckman (Buda, TX, US)
Tail light overlays
Went on easy. Nice cleaner look
D
Dal Fazzone (Los Angeles, CA, US)
Looks great
Very easy to install. Looks great. I didnt think I would loose most reverse light at night. But oh well. Love the look a little more.
M
M.M. (Denver, CO, US)
So sparkly
Love these totally added my personality to my Bronco I was so scared to put these on but also I didn't want to wait warm weather has been slow at getting here but to day was a perfect day to try these on and I am not disappointed they were super easy even for me my grand son loves them too. Can't wait to get more stuff!
S
Shane E
Great product as expected
Easy install after watching video. Fit is perfect and achieves the desired effect to cover the clear part
K
Kim Fisher (Altoona, PA, US)
Looks so nice
These were so easy to apply and it looks like it’s just part of the light.
