Mangoal OBD Hardwire Cable — Parking Mode Upgrade
Powers your Mangoal dash cam straight from the OBD-II port to unlock impact-triggered parking mode — with built-in low-voltage battery protection.
Add Parking Protection to Your Mangoal Cam
This OBD cable upgrades a compatible Mangoal dash cam with parking-mode monitoring. Once installed, the camera automatically powers on and records a one-minute clip the moment a sudden collision or bump is detected while you're parked — so you have evidence even when you're not in the vehicle.
Power is drawn from the OBD-II port, which is typically located under the steering wheel. That gives the cable a clean, factory-style connection point instead of splicing into your fuse box.
|
|
🔋 Built-In Low-Voltage Protection
An integrated voltage stabilizer monitors your battery and cuts power to the camera when the charge drops toward a critical level — leaving you with enough juice to start the car. Note: parking mode records on impact and does not support continuous 24/7 recording.
⚙️ Installation — Pro Recommended
The cable connects at the OBD-II port under the dash. Because power routing and mounting differ from vehicle to vehicle, we recommend having it installed by a technician experienced with hardwire kits. No user manual or install tutorial is included.
Compatibility: Works only with Mangoal dash cameras that use the 8-PIN connector. It will not fit other brands or non-8-PIN Mangoal models.
FAQ
|
Which cameras does this fit?
Only Mangoal dash cams with the 8-PIN connector. It is not compatible with other brands.
Does it support 24/7 recording?
No. It enables impact-triggered parking mode — the cam records a 1-minute clip when a collision is detected, not continuously.
|
Where does it connect?
To the OBD-II port, usually located under the steering wheel.
Will it drain my battery?
No — built-in low-voltage protection cuts power before the battery gets too low to start the car.
|
