Slim Track Dash Bracket Phone Mount — 2021+ Ford Bronco & Bronco Raptor
Turn the top of your Bronco dash into a full control hub. Phones, tablets, a GoPro, a radar detector, even a tuner, all on one rugged all-metal bracket.
It Doesn't Just Fit. It Belongs.
Your Bronco has a rugged interior, so a generic bulky mount just clutters it. The Slim Track bracket is CNC-machined aluminum with precision-chamfered edges and contours that follow the lines of the 6th-gen dash, for an OEM look that appears factory-installed.
It spans the entire center section of the dashboard, giving you the room to set up your phone, tablet, CB radio and more where you can reach them, without blocking your view of the trail.
|
 |
 |
Slim Track: Slide, Swap, Done
The Slim Track top plate lets you slide and reposition device holders on the fly, even out on the trail. Add, remove or move a phone, tablet, GPS or comms holder in seconds with no tools and no piece-by-piece reassembly.
The plate takes the 20 Series 20mm ball & socket system, so you can mix and match holders now and add more later.
|
Sized for the Way You Drive
For the best setup we recommend 5" arms on the driver side and 8" arms on the passenger side. Every configuration except the bare bracket comes with these recommended arm lengths. Choose aluminum or carbon fiber tube arms in the Arm Type selector.
Choose Your Setup
Every option includes the same Bronco dash bracket. Pick your holder in the Configuration selector above.
20LITE Universal Phone Mount (Single or Dual)
Fits nearly all smartphones, cases and sizes, up to 3.7" wide and 0.6" thick. Octagon-shaped grips pull the phone away from the cradle to minimize heat transfer on hot days, and the injection-molded clip-in grips don't rely on adhesive tape. Built on the 20 Series 20mm ball & socket so the phone locks in and stays put on rough terrain.
Pick a single holder for the driver side or dual holders to run two phones or a phone and a second device. Add the GoPro mount option to put an action camera in the center.
|
 |
 |
MagSafe Phone Mount (Non-Charging)
A rock-solid, non-marring magnetic hold for any MagSafe-compatible phone or case. Don't have a magnetic phone? Stick on the included metal adapter ring for the exact same heavy-duty grip. Available as a single or dual setup, with or without the GoPro mount.
|
MagSafe Charging Phone Mount
The same magnetic grip with MagSafe wireless charging built in, so your phone charges while it is mounted. Strong magnets auto-align the phone to the coil, and the adapter ring is included for non-magnetic phones. Choose a single or dual setup, with or without the GoPro mount.
|
 |
 |
25W Qi2.2 / MagSafe Charging & Cooling Mount
Up to 25W of high-speed wireless charging that works with MagSafe, Qi2 and Google Pixel (Pixelsnap) phones. An advanced TEC (thermoelectric) ice cooler actively holds your phone at an optimal charging temperature, so it doesn't overheat and slow down on long drives or hot days.
The included high-power car charger gives you full charging speed. Use the 12V adapter, not a standard USB port.
|
Qi Wireless Charging Mount with LED Accent Ring
An auto-sensing cradle with up to 15W wireless charging. Smart sensors lock the side arms and lower leg the moment you drop your phone in, for easy one-handed use, and auto coil alignment keeps the charge on target. A customizable LED accent ring offers 7 colors (White, Red, Orange, Yellow, Green, Blue, Purple) to match your interior or accent kit.
Fits phones with a case 2.45" to 3.4" wide and up to 0.625" deep. Includes a USB-C to USB-C cable and a 12V car adapter with dual 30W PD USB-C ports.
|
 |
 |
Quad Lock MAG Mounts
If you already run Quad Lock, choose the Quad Lock MAG head (or the wireless charging version). Strong magnets plus the Quad Lock interface add shear resistance and make sure the phone always mounts straight. A Quad Lock MAG case or MAG universal adaptor is required and is not included.
|
Dual-T / Cobb Accessport Tuner Mount
Connects to your Cobb Accessport and most other name-brand monitors that use the 2-prong Dual-T mounting system. Park your tuner on the dash and keep your phone on the other side.
|
 |
 |
Dash Bracket Only
The bare bracket with the Slim Track top plate, for when you already own 20 Series holders or want to build your own layout one piece at a time.
|
Accent Kits — Make It Yours
Every holder comes standard with black knobs. Choose a color in the Accent Kit Color selector and you get a colored set of billet aluminum hardware to swap in for the black knobs — Blue, Green, Orange, Pink, Purple, Red, or Yellow.
On 5" to 12" DuraLock tube arms you can swap the black accent ring for a colored one too. DuraLock arms in 2" to 3.5" lengths, all telescoping arms, and all 26 Series and 38 Series components take the colored knobs only — they are not compatible with accent rings.
How to Install an Accent Kit
Installation
🔧 Installs in Minutes — No Dash Modifications
The bracket attaches with the factory accessory-ready mounting screw and high-strength 3M adhesive. No drilling, cutting or wiring. Mount the bracket, then attach your holders. Charging holders plug into your 12V outlet with the included cable and adapter.
Adding More Holders Later
Specifications
| Fits |
2021+ Ford Bronco & Bronco Raptor (non-Sport) |
| Material |
CNC-machined aluminum, anodized finish |
| Top plate |
Slim Track, 20 Series 20mm ball & socket compatible |
| Install |
Factory accessory-ready mounting screw plus 3M adhesive. No drilling. |
| Arms |
Aluminum tube or carbon fiber tube, 5" driver side and 8" passenger side |
| Accent colors |
Black (standard), Blue, Green, Orange, Pink, Purple, Red, Yellow |
| Weight |
About 1.5 lb (bracket only) to 4 lb (dual GoPro setups) |
Complete the Build
Fitment note: This bracket is for the 2021+ Bronco and Bronco Raptor (non-Sport). It does not fit the Bronco Sport. Charging holders need the included USB cable and 12V car charger to work at full power. Colored accent kits swap in for the black knobs on DuraLock arms; accent rings fit 5" to 12" DuraLock tube arms only (see the compatibility chart above). The lifestyle photos show example setups and may not match the exact configuration you select.
FAQ
Will it fit my Bronco Sport?
No. This bracket is made for the 2021+ Bronco and Bronco Raptor (non-Sport). |
Do I have to drill my dash?
No. It uses the factory accessory-ready mounting screw and 3M adhesive, with zero modification to the dash. |
Which setup should I pick?
Pick Dash Bracket Only if you already own 20 Series holders. Pick 20LITE for a universal holder, MagSafe for a magnetic holder, a charging option to charge on the go, or the Cobb mount to display a tuner. Dual setups run a holder on each side. |
Aluminum or carbon fiber arms?
Both are offered in the same recommended lengths. Aluminum is the standard black look; carbon fiber gives a woven carbon finish. Pick in the Arm Type selector. |
My phone isn't MagSafe. Will the magnetic mounts work?
Yes. The MagSafe mounts include a metal adapter ring you stick to your phone or case. |
Do the charging holders come with a charger?
Yes. They include a USB cable and a 12V car charger adapter. Use the 12V adapter for full charging speed. |
Does the Quad Lock mount include the case?
No. You need a Quad Lock MAG case or MAG universal adaptor for your phone. |
Can I add more holders later?
Yes. The Slim Track plate takes the 20 Series 20mm ball & socket system, so you can add or swap holders at any time. |
Do the accent colors fit every arm?
Colored knobs fit DuraLock single-knob, dual-knob, tube and telescoping arms. Colored accent rings fit 5" to 12" DuraLock tube arms only. |
Can I remove it later?
It attaches with the factory accessory screw and 3M adhesive. Adhesive is semi-permanent, so plan on placing it where you want it to stay. |
