3D Carbon Door Sill Overlay Part 1 (Lower)
Here's some more vinyl to protect the soft plastic trim on your 2022 BRZ or GR86. The textured 3D Carbon is easy to install with air egress channels and surprisingly durable / scratch resistant.
Includes isopropyl alcohol wipes (2).
Clean the application and surrounding areas prior to applying. We recommend the following items for installation:
- Detailing Spray
- Heat Gun or Hair Dryer (optional)
Make sure the area is clean and free from any product similar to Armor All. Pull the rubber and plastic trim behind the application area up slightly. This will let you pop out the trim piece we are covering.
Take the trim piece we are applying vinyl to inside. This will make the installation much easier. Align and install the material. Do this using a dry installation as the material is forgiving. Only when you have proper alignment can you use light heat and pressure to activate the adhesive and make it bond to the trim better.
Reinstall when finished. If you are purchasing our color inserts, you can install these using a wet install. Apply soapy water (1 cup of water with a drop of dish soap) or use our StickerFab Application Fluid to wet the back of the vinyl.
Align and then push out the soapy water or application fluid. Allow to dry and use light heat if needed.