Tailgate Handle Inlay Letters (Standard Vinyl) - 2024+ Tacoma
€6,95 EUR
Earn 39 Points when you buy this item.
- Easy to install
- Customization at a low cost
Earn 39 Points when you buy this item.
This is an easy install that results in a subtle or stand out modification. Customize your brand new truck with ease.
Sold as two full sets.
NOTE: Red white blue option is two letters in red, two in white, and two in blue.
Clean the application area to prepare it for installation. Choose a relatively low humidity day and 70-80 degree weather if possible. Any variance from this will affect the installation.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application area with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
Similar install, but you will not need to use as much liquid. If you use too much liquid you will have to wait for it to dry to adhere. If you use the wrong mixture of soapy water it will also prevent it from sticking for a longer amount of time. You can use a small instrument like a screwdriver to push down the vinyl. Should you have a steady hand, you can do a dry install.
Wet installs require one drop of dish or hand soap in a cup of water. Apply to the vinyl so that the first attempt doesn't make the vinyl permanently stick to the surface. Then you can slide it around and push out the extra water once it is in place with your fingers.
Try doing the install in the shade so it doesn't heat up the vinyl rapidly. Keep a hair dryer around if you want to apply light heat to dry it out once properly aligned. Otherwise you can park it back in the sun and push down the corners. Please make sure all the letters are dry before driving the vehicle or using the object it has been applied to.
Adding small amount of heat to the vinyl after positioned can help it dry out faster.