5.5" Printed American Flag Fender Stickers
Add the American flag to your fenders. Plain and simple. Put your pride on display. Please watch our video for more details and installation tips.
Here's the difference between these and our original flags. The original flags are cut out of standard vinyl. The 50 stars are removed, the appropriate stripes are removed. Transfer paper allows you to properly align it on your vehicle. Since the removal of the 50 stars is so tedious we get another company to make them.
Our very own printed series flags allow us to print any color on clear vinyl and then laminate it with clear or matte finish materials that protect it from harsh UV and other elements that can damage ink.
Note that your vehicle's paint color will be seen below the lighter areas of the sticker. They will fill the flag in with color. If you choose gloss, the appearance will be similar to your normal paint color. If you choose matte, not only will the black areas be matte, but you'll be applying a stealthy matte appearance to your vehicle's paint.
Sold as a mirrored pair.
NOTE: Reflective material is definitely a more expensive material and very unique. Please only use application fluid for installation and NOT soapy water.
- StickerFab Application Fluid or Soapy Water (1 cup per few drops of dish soap, DO NOT USE SOAPY WATER for reflective material)
Felt tipped squeegee or credit card wrapped with the microfiber
- Painter's tape for proper alignment
Clean the application area to prepare it for installation.
NOTES: We recommend that the installation area be free of wax and not under direct sunlight. Some will choose to clean the application with rubbing alcohol which is okay.
"Rubbing alcohol will not damage car paint if it is diluted to between 10% and 15%. Since rubbing alcohol evaporates quickly, it doesn't damage car paint."
We recommend using our StickerFab Application Fluid or soapy water for installation. This allows you to position the vinyl and squeegee out the soapy water / air.
Please follow the installation video.
To remove after item has been installed for a while, please use Goo Gone and a clean towel / paper towel. This will dissolve the remaining adhesive. Be sure to rinse / wash the area after removal.