AWE 0FG High-Clearance Catback Exhaust — 2025+ 4Runner
From overland to everyday — built for the 2025+ 4Runner that sees real off-road use. Trail-ready clearance and an aggressive note, with a drone-free cabin on the long drive to the trailhead.
BashGuard™ — Built for Impact
The BashGuard™ system sets this exhaust apart from every other catback on the market. The muffler outlet is protected by an extra-thick reinforced stainless steel ring designed specifically for trail impacts — rocks, stumps, ledges. It also tucks the system 2.75" higher than stock, reducing the chance of contact in the first place. A detail that matters on a rig that actually goes off-road.
|
|
|
180 Technology® — No Drone
AWE's patented 180 Technology® uses a carefully engineered internal configuration to cancel exhaust drone at highway frequencies. The result is an exhaust note that's active and engaging when you want it — and quiet enough at cruise that you're not fatigued after a 6-hour drive to the trailhead.
Full 3" U.S.-sourced T304L stainless throughout, CNC mandrel-bent with a .065" wall for long-term durability.
|
🔧 Installation — Direct Bolt-On, No Cutting
Uses the factory-matched inlet flange for a straightforward bolt-on install — no cutting, welding, or fabrication. Most experienced DIY installers finish in a couple of hours. Fits both Hybrid and Non-Hybrid 2025+ 4Runner (all trims). Backed by AWE's No CEL Guarantee, Perfect Fitment Guarantee, and Lifetime Warranty.
Specifications
| Spec |
Detail |
| Part number |
AWE3015-28056 |
| Pipe diameter |
3" |
| Material |
CNC mandrel-bent T304L stainless, .065" wall, U.S.-sourced |
| Configuration |
Catback, rear exit |
| Compliance |
50-state emissions legal |
| Clearance gain |
+2.75" vs stock |
| Fitment |
2025+ Toyota 4Runner — Hybrid & Non-Hybrid (all trims) |
| Made in |
Pennsylvania, USA |
| Warranty |
AWE Lifetime Warranty |
FAQ
|
Does this fit the Hybrid 4Runner?
Yes — the AWE 0FG fits both Hybrid and Non-Hybrid 2025+ 4Runner models, all trims.
|
Will it throw a check engine light?
No — AWE guarantees no CEL on this fitment. It's 50-state emissions compliant and works with the factory cat and O2 sensors.
|
|
What does the BashGuard actually protect against?
The reinforced stainless ring at the muffler outlet absorbs direct impacts from rocks, ledges, and trail debris that would dent a standard tip — and it sits 2.75" higher than stock.
|
Does it drone on the highway?
No. AWE's 180 Technology® is engineered to cancel exhaust drone at highway cruise RPM — well-tested across AWE's exhaust lineup.
|
|
Is professional installation required?
No — direct bolt-on using the factory inlet flange, no cutting. Most experienced DIY installers finish in a couple of hours.
|
What's it made from?
Full 3", .065"-wall U.S.-sourced T304L stainless steel, CNC mandrel-bent and handcrafted in Pennsylvania.
|
