aFe Scorcher Blue Bluetooth Power Module — 2.3L Bronco & Ranger
Plug-and-play turbo boost control with four power modes and phone control, and nothing written to your ECU.
The Fastest Way to Wake Up a 2.3L EcoBoost
The Scorcher Blue is aFe's next-generation Bluetooth power module. It raises turbo boost to improve throttle response, efficiency and overall performance, and it does it without modifying or leaving any trace on the Engine Control Unit.
Factory-style connectors plug into your engine sensors, so the install is quick and fully reversible. Pull it out and the truck is back to stock.
|
|
Dyno-Tested Power Gains (Race Mode)
-
Bronco 2.3L: +33 HP and +43 lb-ft of torque at 4,000 RPM.
-
Ranger 2.3L: +31 HP and +43 lb-ft of torque at 3,815 RPM.
|
Your Phone Becomes the Remote
The module is Bluetooth 4.0 capable and pairs with most iOS and Android phones through the free Scorcher Blue app. You can switch power modes without running any wires through the firewall.
- Live turbo boost (MAP) gauge.
- Customize each power mode to suit how you drive.
- Measure 0-60 and quarter-mile times.
- Update the module to the latest revision from the app.
|
Four Power Settings, One Glance
Pick a mode with the in-cab LED control switch or from the app. The light on the switch tells you which one you are in:
-
Green: Stock
-
Yellow: Sport
-
Orange: Sport+
-
Red: Race
The switch can be routed through the firewall into the cabin, or you can skip it and control everything from Bluetooth.
|
|
|
What's in the Box
- Scorcher Blue Bluetooth power module.
- Handheld LED control switch.
- Plug-and-play wiring harness with factory-style connectors.
- Zip ties and adhesive pads for mounting.
The mobile app is a free download from the App Store or Google Play.
|
⚙️ Installation — Plug-and-Play
The module connects to engine sensors with factory-style connectors, so there is no cutting or splicing. The LED switch can be routed through the firewall into the cabin, or you can leave it out and use the Bluetooth app instead.
Because it never touches the ECU, the Scorcher Blue leaves no footprint and can be unplugged to return the truck to stock.
Complete the Build
Note: This module is for the 2.3L EcoBoost Ford Bronco (2021-2024) and Ranger (2019-2024) only. Not currently CARB exempt, so it cannot be shipped to California or used on any vehicle registered in California. aFe does not recommend running the Scorcher Blue with any other tuner or power module, and recommends only the Sport or Sport+ settings while towing.
FAQ
|
Which vehicles does this fit?
The 2.3L EcoBoost Ford Bronco (2021-2024) and the 2.3L EcoBoost Ford Ranger (2019-2024).
|
Does it fit the 2.7L Bronco?
No. The 2.7L Bronco and F-150 use a separate Scorcher Blue module, linked above under Complete the Build.
|
|
Does it flash or modify my ECU?
No. It plugs into engine sensors and leaves no trace on the ECU, so it can be unplugged to return the truck to stock.
|
How much power does it add?
In Race mode aFe measured +33 HP / +43 lb-ft on the 2.3L Bronco and +31 HP / +43 lb-ft on the 2.3L Ranger.
|
|
Do I need the phone app?
No. You can change modes with the in-cab LED switch. The app adds the boost gauge, custom power modes, acceleration timing and updates.
|
Can I use it with another tuner?
aFe does not recommend running the Scorcher Blue with any other tuner or power module. For towing, aFe recommends using only the Sport or Sport+ settings.
|
