Fitment: 2024+ INEOS Grenadier — OEM US-spec front bumper only. ⚠ US models only. These inserts are cut to the shape of the US-spec bumper step and will not fit other-market bumper shapes.
Front Bumper Step Pad Overlay Inserts — 2024+ INEOS Grenadier
Step Up. Protect Your Finish.
A clean, functional upgrade for your 2024+ INEOS Grenadier. These matte black acrylic step pad inserts give you a secure place to step onto your front bumper — so you can reach the hood, windshield, or roof rack without scuffing, scratching, or wearing down the factory finish underneath.
Grippy, OEM-Look Finish
Precision-cut from matte black acrylic with an engineered tread pattern for confident footing. Understated and purpose-built — it looks like it belongs there from the factory.
Sold as a Pair
Each set includes driver and passenger side inserts, cut to match the US-spec bumper steps for a symmetrical, factory-integrated look.
Features
Finish: Matte black acrylic — subtle, OEM-look
Sold as a pair — driver and passenger side
Protects your finish: step up confidently without damaging the paint or bumper cap
Pre-applied 3M™ 468MP adhesive transfer tape — professional-grade, weather-resistant bond
Easy to install and easy to replace if ever needed
Made in the USA
What's Included
(2) Matte black acrylic step pad inserts (driver + passenger side)
Pre-applied 3M™ 468MP adhesive — no extra tape needed
Installation Instructions
These inserts come with 3M™ 468MP adhesive transfer tape pre-applied. For the strongest, longest-lasting bond, follow these steps:
Work at 70°F (21°C) or warmer. Install and keep the vehicle at this temperature — bonding is dramatically slower below 50°F. Warmer surfaces (up to ~80+°F) speed up the bond.
Clean the bumper step surface thoroughly with isopropyl alcohol. Remove all dirt, wax, oil, and residue, then let it fully dry. A clean surface is critical — any residue will weaken the final bond.
Dry-fit first. Set each insert in place to confirm alignment before removing the adhesive liner. The 468MP is briefly repositionable on first touch, but plan your placement.
Peel the liner and apply. Position carefully, then press firmly. Use a roller or firm hand pressure across the entire pad — high pressure forces the adhesive to fully "wet out" and bond to the surface.
Let it cure. The bond reaches ~50% strength in 20 minutes, ~90% in 24 hours, and full ultimate strength in 72 hours at room temperature. Avoid heavy stepping/loading for the first 24 hours and don't wash or expose to water for at least 24-48 hours.
Built for the Elements
Once fully cured, the tread and permanent-grade 3M bond hold up to real-world weather — rain, mud, and daily use — so you always have sure footing when you step up.
Installation Video
Watch the full step-by-step install for the 2024+ INEOS Grenadier front bumper step pad inserts:
Frequently Asked Questions
Will these fit my Grenadier? They fit the 2024+ INEOS Grenadier OEM US-spec front bumper. They are shaped for the US-market bumper and will not fit other-market bumper shapes.
Do I need any extra adhesive or hardware? No — 3M™ 468MP adhesive is pre-applied. You just need isopropyl alcohol to prep the surface.
Can they be removed or replaced? Yes. They're easy to replace if ever needed, though the 468MP forms a strong permanent-grade bond once fully cured. Just heat and pull with your fingers or a trim piece tool with a soft cover (ie felt).
Will they damage my bumper? No — that's the point. They protect the factory finish from scuffs and wear when you step on the bumper.
