StickerFab

3D Carbon Quarter Window Trim Overlay - 2022+ Subaru WRX

  • Sale
  • £8.00
  • Regular price £9.00




2022+ Subaru WRX 3D Carbon Quarter Window Trim

Give your plastics a deep, dark, textured appearance with these overlays.  The normal plastic trim is susceptible to sun fade so you can keep it looking good and add some style as well.

This material is durable and will last for years. I source the vinyl for these products from US suppliers. They are often made in the US or Europe. Material standards are high.

For the 3D Carbon material, do not apply wax. Just clean with normal soap and water.  For an ultra cool finish, clean with 303 Aerospace.

NOT ALL MATERIALS ARE CREATED EQUALLY CUSTOMER MESSAGE 

"Got them just now, thanks for including a(n) extra set! I've had 2 sets of CF look ones from another seller and silver stars kept peeling and the carbon look faded really bad." When purchasing vinyl overlays, keep in mind that not all materials are created equally.  

We use premium vinyl which has high initial costs, but are the industry standards for high quality materials. Also made in the USA. - Dragon Wrap™ Carbon Fiber Films (3D Carbon) is a 5.6 mil calendered vinyl film featuring a clear repositionable permanent acrylic adhesive on an air-egress liner. This film has excellent dimensional stability, outstanding durability and outdoor performance.

- This repositionable permanent adhesive offers minimal initial bond growing to permanent bonds that facilitates application of large graphics. The air egress liner also aids in large graphic application.

- Up to 5 year durability outdoors. Rated EXCELLENT for WATER RESISTANCE, HUMIDITY RESISTANCE, and SOLVENT RESISTANCE.

INSTALLATION

Recommended items:

The fluid, squeegee, and microfiber can also be purchased as a kit here.

Ideal install weather is 75-85 degrees for 24 hours or more during the drying / adhering process.

Keep a heat gun or hair dryer around to apply light heat to encourage adhesion and dry out liquids when doing a wet install.  The materials are heat and pressure activated.

We recommend a dry or wet install for 3D carbon. This material is forgiving if you lay it down slightly off and pull it back up as long as you have not firmly pushed down a majority of it. The material has air egress channels to make it easier to install and get bubbles out with your fingers or a felt squeegee. Some squeegees can be too hard and scratch the material or you'll accidentally scratch your paint.

We recommend using Stickerfab application fluid.  

Prepare the vehicle by cleaning the trim. Do not clean it with a wash and wax type product. Just use a cleaner.

Adhesion increases with pressure and heat. Use a hairdryer if needed. 



Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)