J&L Oil Separator 3.0 (PCV Side) for the 2025-2026 Ford Bronco & Ranger 2.3L
Keep blowby oil out of your 2.3L EcoBoost's intake with a billet-aluminum J&L oil separator built for the PCV (dirty) side — plug-and-play, lifetime warranty, made in the USA.
Protect Your 2.3L EcoBoost From Blowby
As your engine vents crankcase pressure back through the intake tract, oil vapor accumulates in your intake tube, manifold runners, and can even dilute your fuel and lower its octane. Forced-induction engines like the 2.3L EcoBoost see this worse because crankcase pressures are higher.
The J&L Oil Separator intercepts that oil before it reaches your intake. Milled from solid 6061 billet aluminum, it uses a fine stainless-steel mesh filter that traps oil vapor and drops it into the reservoir — clean air passes through to the intake.
|
 |
 |
Plug-N-Play — About 30 Minutes
Installs with OEM-style quick-connect fittings — no cutting, no special tools. It ties into the factory PCV line on the dirty side of the engine, and the whole kit is fully reversible if you ever return to stock (retain your factory hose).
The knurled, O-ring-sealed reservoir twists off by hand so you can drain the collected oil in seconds. The 3 oz tank holds plenty — most drivers check it every 1,000 miles and service every 2,500-3,500.
|
⚠ California (CARB) Notice: This product is NOT CARB exempt. It is not for legal sale or use in California or any state adopting California emission standards. Any order with a California shipping address will be cancelled.
This Part Fits
| Years |
Make |
Model |
Engine |
| 2025-2026 |
Ford |
Bronco |
2.3L EcoBoost |
| 2025-2026 |
Ford |
Ranger |
2.3L EcoBoost |
PCV (dirty) side separator. Fits 2.3L EcoBoost engines only.
FAQ
|
Which side does this cover?
This is the PCV (dirty) side separator. On most 2.3L applications the PCV side is all you need — it's under vacuum most of the time while driving.
|
How often do I empty it?
Check around every 1,000 miles to learn your rate; most go 2,500-3,500 between drains. Twist off the reservoir by hand — no tools.
|
|
Is it reversible?
Yes. It uses OEM-style quick-connect fittings and no cutting, so you can return to stock anytime (keep your factory hose).
|
Can I add more capacity?
This 3059P kit is not extension-compatible. If you need more than 3 oz, check our other J&L separators that accept the can extension.
|
More J&L for Your Bronco
