The Bronco Headlight Built to Out-Shine Everything Else
Morimoto's flagship XRGB Evo is a street-legal Tri-Beam LED upgrade for the 2021+ Ford Bronco and 2022+ Bronco Raptor, with configurable DRL colors, sequential signals and an optional Supercharged driver upgrade.
Tri-Beam Technology
Each XRGB Evo combines three light sources in one housing: a Type 1 Ishida Bi-LED projector for the main beam, a side-specific low-beam reflector assist, and a high-beam reflector assist. The result is a wider, longer and more even beam pattern than a single projector can deliver.
Out of the box the LEDs are driven at about half of their potential intensity so the lights stay within DOT / FMVSS108 limits for glare and illumination. The vertical aim is fully adjustable within ±6 degrees, so alignment stays dialed in even on a lifted Bronco.
Your DRL, Your Way
Run a crisp white or amber daytime running light with no loss in intensity, or unlock full RGBWA color through the free Morimoto XBT Bluetooth app. Plug-in mode selector keys on the back of each light let you choose white or amber DRL and sequential or fade-off turn signals in seconds.
The two-tone piano-black and titanium interior, textured DRL and signal surfaces, and the multi-stage welcome sequence at start-up give the Bronco a look that stands apart from every other aftermarket option.
Inside the Morimoto XRGB Evo
Optional Supercharged Drivers
Want even more light for trails and night runs? Choose Supercharged Drivers in the option selector. They replace the standard DOT-spec LED drivers on the back of each housing and boost low-beam and high-beam output by roughly 30-50% over the standard setup, without affecting reliability or the Morimoto warranty.
Three color-coded status LEDs on each driver (red for DRL power, green for low beam, blue for high beam) make setup and troubleshooting simple. Because the output exceeds DOT limits, Supercharged Drivers are for off-road use only.
Low-beam pattern at 25 ft: factory LED vs XB LED vs XRGB Evo (standard and Supercharged drivers)
Street-legal vs. off-road use: Out of the box the XRGB Evo is designed to meet DOT / FMVSS108. Enabling RGB mode requires cutting an exposed wire in the housing, which permanently ends on-road compliance in the USA and Canada and cannot be reversed. Installing the Supercharged Drivers also results in non-compliant peak intensity. It is the installer's responsibility to follow all state and local laws. Once the RGB wire is cut or the Supercharged Drivers are installed, the headlights are not eligible for return.
Full Overview and Install
Bolt-On Install, No Modifications
The XRGB Evo is built to OE specifications. It bolts to the factory mounting points, lines up with the surrounding sheet metal and plugs into the factory harness, with no dash errors, flicker, flashing or radio interference, and no factory-warranty-voiding modifications. You will need a trim tool, a ratchet with 8 mm and 10 mm sockets and a #2 Phillips screwdriver.
Note: Designed for North American vehicles. Left-hand-drive / right-hand-traffic cut-off only. The option selector lets you choose standard DOT drivers or Supercharged Drivers.
What's in the Box
1x driver-side and 1x passenger-side XRGB Evo headlight · 1x DRL relay · 1x DRL harness · 1x fuse tap · 2x RGB crossover harnesses · 4 pairs of DRL / signal mode selector keys · 2x mode selector extensions · free Morimoto XBT Bluetooth app (compatible phone required) Supercharged option adds: 2x Supercharged LED drivers, 8x screws and a packet of dielectric grease.
RGB via Bluetooth app, white or amber (configurable)
Interior finish
Two-tone piano black and titanium with contrasting textures
Side marker
Amber side reflex reflector (DOT compliant)
Lens
Polycarbonate with proprietary anti-UV hard coating
Supercharged driver rating
1,500 mA, 30-50% output increase, off-road use only
Warranty, Shipping & Returns: The Straight Answers
What owners ask before buying headlights, answered plainly.
Warranty: 5-year limited Morimoto warranty, serviced and supported by the Morimoto team in Atlanta, GA. It does not cover modifications, alterations or misuse. If anything looks wrong at install, photograph or video it and contact us before removing the lights.
Shipping: ships to the lower 48 United States only (no Alaska, Hawaii, APO/FPO or international).
Returns: 30-day returns on unused, unmodified headlights. Once the RGB wire has been cut or the Supercharged Drivers have been installed, the product is not returnable.
Are the XRGB Evo headlights street legal? Out of the box, yes: they are designed to meet DOT / FMVSS108 with a white or amber DRL. Cutting the RGB wire to enable color mode, or installing the Supercharged Drivers, makes them non-compliant for public roads in the USA and Canada.
Do I need the Supercharged Drivers? No. The standard drivers already deliver strong, compliant output. The Supercharged Drivers are an off-road upgrade for owners who want 30-50% more light and accept that the output is not road legal.
Can I add the Supercharged Drivers later? Yes, they are a direct replacement for the standard drivers on the back of each housing. Once installed, you can only return to compliant intensity by reinstalling the standard DOT-spec drivers.
Does it fit the Bronco Raptor? Yes. They fit the 2021+ Ford Bronco and the 2022+ Bronco Raptor.
Do I need an app to use them? No. White or amber DRL works without the app. The free XBT Bluetooth app (compatible phone required) is only needed to control RGB color after the RGB wire has been cut.
Why do my signals hyper-flash? If the vehicle has aftermarket tail lights, side markers or other non-OEM exterior lighting, mismatched impedance can cause hyper-flash or sequential-signal issues. This is not a headlight defect. Morimoto or OEM tail lights avoid it.
Can I change the turn signal and DRL behavior? Yes. Swap the color-coded mode selector keys on the back of each light to choose white or amber DRL and sequential or fade-off turn signals. Four pairs of keys are included.
Is installation hard? They bolt to the factory mounting points and plug into the factory connectors. Expect to remove the upper grille cover, grille and front trim panel to pull the stock lights. A trim tool, 8 mm and 10 mm sockets and a #2 Phillips screwdriver are all you need.